PEER UCLP211-55mm pillow block bearing

PEER UCLP211-55mm is a reference of pillow block bearing, within Bearing housings. Request a quote for UCLP211-55mm via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UCLP housing is a mounted pillow block bearing: a unit that combines a cast iron housing with an insert ball bearing, already aligned and ready to bolt onto a flat base. It is used to support transmission shafts in equipment where mounting must be simple and the shaft runs parallel to the mounting surface. MR Accesorios Industriales sells the PEER line in Buenos Aires, Argentina.

The UCLP designation is read in parts: the letters identify the pillow block housing family with insert bearing, and the number that follows indicates the shaft size. In examples from the series, UCLP201-12mm corresponds to a 12 mm shaft, UCLP204-20mm to 20 mm and UCLP209-45mm to 45 mm. The millimeter suffix clarifies the shaft size, which is useful when comparing with inch-based nomenclatures. The series covers from 12 to 45 mm.

These housings appear in belt and roller conveyors, sorting belts, mixers, blowers, exhaust fans and packaging lines. They are also found in agricultural equipment, food plants and metalworking shops throughout the country. The cast iron housing with a flat base allows it to be bolted directly to the structure, and the insert ball bearing accommodates minor misalignments without requiring complicated machining on the shaft.

To choose well, take into account the shaft diameter, the type of load and the environmental conditions. The insert's sealing defines whether the housing withstands dust, moisture or frequent washdowns. Lubrication must be renewed according to the duty cycle, and base alignment prevents stress on the insert. During mounting, first secure the housing and then tighten the insert onto the shaft with the set screws, without striking the raceway.

Cross-references between brands are resolved by shaft size and housing type: a 25 mm UCLP can replace another pillow block unit with insert for the same diameter, as long as the mounting hole and center height match. If you bring an unidentified part, the shaft size and a photo are enough to locate the compatible reference.

If you need to request a quote for a UCLP housing, send the complete code or the shaft size via WhatsApp to MR Accesorios Industriales. We will quote the exact reference and indicate the compatible alternative if you come with another brand's code.