PEER UCLP207-22 pillow block bearing

PEER UCLP207-22 is a reference of pillow block bearing, within Bearing housings. Request a quote for UCLP207-22 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The PEER UCLP pillow block is a mounted bearing unit: a unit that combines a cast housing with an insert ball bearing, already aligned and ready to mount on a flat base. It is used to support rotating shafts in equipment where simple, robust fastening is required, with the advantage that the insert is secured to the shaft with set screws and allows mounting without special machining. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The UCLP designation is read as a family of pillow blocks with insert bearing: the letters identify the housing type and the insert series, and the number that follows indicates the shaft size. In the examples UCLP201-8, UCLP202-9 and UCLP204-12, the first numeric block indicates the insert size and the suffix after the hyphen corresponds to the shaft diameter in inches. Thus, a UCLP205-14 shares the housing with other UCLP205 but changes the bore diameter according to the suffix. Knowing this logic allows you to request the exact code you need.

These housings are used in belt conveyors, bucket elevators, mixers, fans, centrifugal pumps and packaging lines. In the Argentine industrial sector they appear in food plants, cement plants, tanneries, water treatment plants and metalworking workshops, where the environment may be humid or dusty. Their pillow block format facilitates mounting on profiles or base plates, and the insert with balls and contact seals keeps lubrication retained while the shaft rotates.

To select the housing, verify the shaft diameter and the type of fastening the insert accepts: some have set screws or an eccentric collar, and that choice defines the ease of mounting and the direction of rotation. Also check the sealing, because in environments with moisture or particles a contact lip in good condition is advisable. When mounting, place the housing on a clean, flat surface, align both shaft supports and tighten the insert fastening screws with the appropriate wrench. Correct initial lubrication and careful alignment extend bearing life.

PEER UCLP housings can be interchanged with units from other brands that share the same housing geometry and shaft diameter, such as equivalent series from SKF, NTN or FYH. Interchangeability depends on the foot dimensions, the center height and the insert type, not only the code. If you have another brand's code or an unidentified part, write to us on WhatsApp and we will indicate the compatible alternative or quote the exact size you need.

To request a quote for your UCLP pillow block, send the complete code by WhatsApp to MR Accesorios Industriales, for example UCLP204-12 or UCLP205-14. You can also inquire about other sizes in the series or about units with inserts of equivalent characteristics. We will reply promptly with the quote and the technical information you need for your application.