PEER SUCHA207-20 hanger bearing
- Brand
- PEER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We respond promptly.
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
PEER SUCHA207-20 is a reference of hanger bearing, within Bearing housings. Request a quote for SUCHA207-20 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SUCHA hanger housing with PEER insert bearing is a mounted unit that is fixed to a structure to support and guide rotating shafts. It is used in conveyors, transmission lines and equipment where the shaft needs an intermediate support point. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and helps you choose the correct size for your application.
The SUCHA designation is read as a family of hanger housings with insert bearing. The examples range from SUCHA201-8 to SUCHA205-16: the number after SUCHA indicates the bearing size, and the suffix after the hyphen identifies the shaft diameter in inches. Thus, a SUCHA204-12 corresponds to a bearing from the 204 series with a 12/16 inch shaft, while a SUCHA205-16 combines the 205 series with a 1 inch shaft. That logic lets you quickly locate the part you need.
These housings appear in belt and roller conveyors, elevators, mixers, packaging belts and transmission lines in food, chemical and materials plants. In Argentina they are seen in grain handling equipment, feed plants and aggregate handling systems. Their hanger format allows supporting long shafts where no wall or base is available, maintaining alignment and reducing shaft deflection.
To select the housing, take into account the shaft diameter, the mounting type and the working environment. The insert bearing seal protects against dust and humidity; in applications with washdowns or exposure to particles, it is advisable to verify the seal type. Proper lubrication and careful alignment of the housing with the shaft extend service life. The mounting must allow the bearing to self-align inside the housing to absorb small deviations.
When looking for equivalents, hanger housings with insert bearing are identified by the series and the shaft diameter. Different brands use similar nomenclatures, but mounting dimensions may vary. If you bring the code from another brand or an unidentified part, at MR Accesorios Industriales we will indicate the compatible alternative or quote the exact size you need.
To move forward with your inquiry, send us on WhatsApp the SUCHA code shown on your equipment or the shaft size and housing type. At MR Accesorios Industriales we will quote you promptly and advise you so that the part fits your application without problems.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the suffix after the hyphen in SUCHA204-12 mean?
- The suffix indicates the shaft diameter in inches, expressed in sixteenths. In SUCHA204-12, the 12 corresponds to 12/16 of an inch, that is 3/4 of an inch. The previous number, 204, identifies the insert bearing size.
- How do I choose between a SUCHA201-8 and a SUCHA205-16?
- The choice depends on the shaft diameter and the required load capacity. The SUCHA201-8 is for 1/2 inch shafts, while the SUCHA205-16 is for 1 inch shafts. Verify the shaft size and consult us on WhatsApp to confirm the right option.
- What should I take into account for mounting a hanger housing?
- It is important to align the housing with the shaft and ensure firm fixing to the structure. The insert bearing must be able to self-align. Check the sealing according to the environment and lubricate according to the manufacturer's recommendations to avoid premature wear.