PEER SUC207-22 insert bearing

PEER SUC207-22 is a reference of insert bearing, within Bearings. Request a quote for SUC207-22 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The PEER SUC series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and take-up units. It is used in equipment where motion must be transmitted with simple alignment and accessible maintenance. MR Accesorios Industriales sells this line for plants and workshops throughout the country.

The SUC series designation combines letters and numbers that identify the insert: SUC indicates the type of insert bearing with extended inner ring, and the number that follows — as in SUC201-8, SUC202-9 or SUC205-16 — indicates the bore size and the outer diameter. The numeric suffixes make it possible to distinguish variants within the same series, so the complete code is the reference you need to send us to quote the exact insert.

These bearings are mounted in split plummer block housings, take-up units and bearing units used in conveyor belts, mills, mixers, bucket elevators and process equipment. In Argentina you will find them in food, cement and chemical plants and in maintenance workshops that replace worn inserts without changing the entire housing. The SUC series is one of the usual options for shafts with moderate radial loads.

To choose the right insert, take into account the shaft diameter, the type of sealing required by the environment (dust, moisture or frequent washdowns) and the internal clearance the application needs. During mounting, check that the housing is clean and free of burrs, align the insert with the shaft and tighten the fastening screws with the appropriate wrench. Lubrication must be the one indicated for the working temperature, and it is advisable to check the condition of the seals at every stop.

If you are replacing an insert bearing from another brand, the most practical approach is to compare the main dimensions: bore diameter, outer diameter and inner ring width. With that data and the original part number, we can tell you the equivalent within the PEER line. Interchangeability between manufacturers is not always direct, so it is advisable to confirm dimensions before mounting.

To request a quote for your PEER SUC series insert bearing, send us by WhatsApp the complete code that appears on the part or on the housing. You can also send us the shaft and housing dimensions if you do not have the reference at hand. At MR Accesorios Industriales we reply promptly with the quote for the insert you need.