PEER HCSLP202-10 pillow block bearing
- Brand
- PEER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We respond promptly.
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
PEER HCSLP202-10 is a reference of pillow block bearing, within Bearing housings. Request a quote for HCSLP202-10 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The PEER HCSLP pillow block is a mounted unit that combines an insert ball bearing with a pillow block housing, ready to bolt to a flat base. It is used to support shafts in equipment where alignment and sealing are critical, such as conveyor belts, fans and agricultural machinery. MR Accesorios Industriales brings you this PEER line with technical advice so you choose the correct code.
The HCSLP designation identifies the series of pillow blocks with insert bearing. The number that follows indicates the shaft diameter: for example, HCSLP201-8 corresponds to a 1/2 inch shaft, HCSLP202-9 to 9/16 inch, HCSLP202-10 to 5/8 inch and HCSLP203-11 to 11/16 inch. The numeric suffix after the hyphen refers to the measurement in inches, while the base number groups similar housing sizes. This nomenclature lets you quickly identify the size you need.
These pillow blocks are used in industries such as food, agriculture and logistics, in equipment such as conveyors, bucket elevators, mixers and fans. In Argentina, they are common in processing plants and road machinery. Their pillow block design allows the shaft to be mounted on a horizontal surface, making maintenance and replacement easier without having to disassemble the whole assembly.
To select the pillow block, check the shaft diameter and the type of mounting required. The insert bearing usually comes with set screws or with an adapter sleeve; make sure the locking system is the right one for your application. Sealing is key: choose the seal type according to the environment (dust, humidity, washdowns). During mounting, align the housing with the shaft and tighten the mounting bolts evenly to avoid axial loads. Lubrication must be the one indicated by the manufacturer and renewed according to the duty cycle.
If you need to replace a pillow block from another brand, the PEER HCSLP code may have equivalents in other lines. What matters is comparing the housing dimensions, the shaft diameter and the type of mounting. At MR Accesorios Industriales we help you find the right equivalent from the original code or a sample. Do not hesitate to ask us.
To request a quote for the PEER HCSLP pillow block you need, message us on WhatsApp with the full code (for example, HCSLP201-8) or with the shaft and housing dimensions. At MR Accesorios Industriales we reply promptly with availability and alternatives if applicable.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the code HCSLP201-8 mean?
- The code HCSLP201-8 identifies a pillow block with insert bearing for a 1/2 inch shaft. The HCSLP series groups pillow block housings, and the number after the hyphen indicates the shaft measurement in inches. Ask us about other sizes.
- Is this pillow block suitable for dusty or humid environments?
- The HCSLP pillow block can be fitted with different types of sealing depending on the environment. For dusty or humid environments, it is recommended to check the seal type of the insert bearing. Write to us with your application and we will advise you.
- How do I ask for the equivalent from another brand?
- To find the equivalent, send us the code of the pillow block you currently use or the shaft and housing dimensions. At MR Accesorios Industriales we will tell you the PEER HCSLP reference that best fits your equipment.