PEER HCP213-40 pillow block bearing

PEER HCP213-40 is a reference of pillow block bearing, within Bearing housings. Request a quote for HCP213-40 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The HCP pillow block is a mounted bearing unit: a unit that combines a cast iron housing with an insert ball bearing, already mounted and lubricated. It is used to support rotating shafts in equipment where alignment and sealing are critical. MR Accesorios Industriales sells the PEER line in Buenos Aires, Argentina, and advises you on choosing the correct size for your shaft.

The HCP designation is read as a family of pillow blocks with insert bearing. The number that follows indicates the size: HCP201-8, HCP202-9 and HCP202-10 are the smallest sizes in the series, while HCP203-11, HCP204-12, HCP205-13, HCP205-14 and HCP205-15 cover larger shaft diameters. The suffix after the hyphen identifies the exact bore size of the insert, so two references with the same base number can differ in shaft diameter. To request a quote, send us the complete part number.

These pillow blocks appear in belt conveyors, bucket elevators, mixers, mills, screens and process equipment in food, chemical and aggregate plants. They are also found in industrial fans, centrifugal pumps and agricultural machinery. In Argentina, they are common in packaging lines and waste treatment plants, where a dusty or humid environment demands reliable sealing and a mounting that withstands the weather.

To select the pillow block, take into account the shaft diameter, radial and axial load, and environmental conditions. The PEER insert comes with seals that retain grease and block contaminants; check that the seal lip is not damaged during mounting. Lubrication is done through the housing grease fitting, with compatible grease. Aligning the pillow block with the shaft is key: angular misalignment accelerates wear on the insert and the seal.

PEER HCP pillow blocks are interchangeable with other brands that use the same nomenclature and dimensions. If you have a part number from another brand, send it to us and we will tell you the equivalent. Interchangeability depends on the shaft diameter, the distance between mounting holes and the height to center. MR Accesorios Industriales quotes the exact part number you need and advises you on installation.

To move forward with your inquiry, send us via WhatsApp the HCP part number shown on the plate or on the old bearing. If you do not have it at hand, tell us the shaft diameter and the pillow block dimensions. We will quote you promptly and send you the technical information you need to replace it without errors.