PEER HCP201-12mm pillow block bearing

PEER HCP201-12mm is a reference of pillow block bearing, within Bearing housings. Request a quote for HCP201-12mm via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The PEER Y-bearing pillow block with insert bearing is an assembled unit that combines a pillow block with an insert bearing. It is used to support rotating shafts in equipment where simple alignment, mounting and lubrication are required. It is a common solution in agricultural machinery, conveyors and process equipment, because it simplifies mounting and reduces maintenance. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and helps you choose the code according to the shaft diameter.

The HCP designation followed by a three-digit number identifies the size of the insert bearing: the last two digits correspond to the shaft diameter in millimeters when the suffix is mm, as in HCP201-12mm or HCP205-25mm. The mm suffix confirms that the measurement is expressed in millimeters. For each code, the housing and the insert come assembled and ready to mount. If you need to confirm the exact measurement of your shaft, send us the code or the measurement and we will quote it.

These pillow blocks appear in belt and roller conveyors, mixers, screens, fans, bucket elevators and process equipment. In agriculture they are found in seeders, harvesters and storage plants; in the food and chemical industry, in packaging lines and pumps. The pillow block can be fixed to a flat base with two bolts, and the insert bearing has an inner ring that fits the shaft. It is a robust solution for environments with dust, humidity or frequent washdowns.

To select the code, start from the shaft diameter and the type of load: predominantly radial in most cases. Verify that the pillow block rests on a rigid, aligned surface; an uneven base accelerates wear. The insert usually comes with labyrinth or contact sealing, and with the possibility of relubrication. When mounting, tighten the inner ring set screws according to the recommended torque and verify that the shaft turns freely. If the equipment works with high vibration, periodically check the fit.

Y-bearing pillow blocks with insert bearing are available under different designations depending on the manufacturer: equivalent series from other brands may differ in the locking system, sealing or insert tolerance. Therefore, when replacing a unit, compare the shaft diameter, the overall height and the mounting hole diameter. If you send us the code of the original part or a photo with measurements, we will indicate the compatible alternative from PEER or another brand we sell.

MR Accesorios Industriales sells the PEER line of Y-bearing pillow blocks with insert bearing in Buenos Aires, Argentina. If you need a code for your equipment, message us on WhatsApp with the code or the shaft measurement and we will quote it promptly. We can also advise you on mounting and lubrication so the unit works in the best conditions.