PEER GRP212-37 pillow block bearing

PEER GRP212-37 is a reference of pillow block bearing, within Bearing housings. Request a quote for GRP212-37 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The GRP housing is a pillow block mounted bearing: a ready-to-mount unit that combines a cast iron housing with an insert ball bearing. It is used to support rotating shafts in equipment where simple and robust fastening is required. MR Accesorios Industriales sells this PEER line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The GRP designation reads as a family of pillow block housings with insert bearing. The numbers that follow indicate the size: for example, GRP204-12 and GRP204-13 share the bore diameter of series 204, while the suffix after the hyphen identifies the exact bore size. In GRP205-13, GRP205-14, GRP205-15 and GRP205-16 series 205 is repeated with different bore variants. The same applies to GRP206-17 and GRP206-18 within series 206. That combination of series and suffix is what defines interchangeability.

These housings are used in conveyors, belts, elevators, mixers, fans and agricultural machinery. In Argentine industry they appear in food plants, cement plants, tanneries and maintenance workshops. Their pillow block format allows mounting on flat structures or beds, with two mounting holes, and easy shaft alignment. They are a common solution when moderate radial loads and some mounting misalignment need to be supported.

To select the correct housing, take into account the shaft diameter, the type of load and the environmental conditions. The insert seal protects against dust and moisture; in very dirty environments it is advisable to verify the seal type. Proper lubrication and careful alignment during mounting extend service life. If the equipment operates with vibrations, check the tightening of the bolts and the internal clearance of the bearing.

Interchangeability between brands is handled by series and size: a PEER GRP housing may correspond to similar lines from other companies, as long as the shaft diameter and mounting dimensions match. To confirm interchangeability, the most practical approach is to compare the complete code and the main dimensions. MR Accesorios Industriales advises you to find the equivalent part according to your equipment code.

If you need a GRP housing with insert bearing, send the code or exact size via WhatsApp to MR Accesorios Industriales. We will quote you promptly and indicate the compatible alternative if you bring the code from another brand. We can also manufacture split housings to measure according to your requirement. We are in Buenos Aires, Argentina, with more than 80 years supporting industry.