PEER GRP206-30mm pillow block bearing

PEER GRP206-30mm is a reference of pillow block bearing, within Bearing housings. Request a quote for GRP206-30mm via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Y-bearing housing with PEER insert bearing is a pillow block unit that combines an insert ball bearing with a housing that is fixed to the structure. It is used to support rotating shafts in equipment where alignment is not perfect and loads are moderate. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with metric sizes from 20 mm shaft diameter upward.

The designation GRP followed by a number and the diameter in millimeters identifies each size: GRP204-20mm, GRP205-25mm, GRP206-30mm, GRP207-35mm, GRP208-40mm, GRP209-45mm, GRP210-50mm and GRP211-55mm. The middle number increases with the bearing size and the millimeter suffix indicates the shaft diameter it accepts. Thus, GRP208-40mm corresponds to a housing for a 40 mm shaft. These part numbers let you request the exact size you need.

They are used in belt conveyors, bucket elevators, packaging belts, mixers, fans and agricultural machinery. In food, cement, aggregate and water treatment plants, where there is dust or moisture, the insert seal helps retain lubricant and slow the entry of contaminants. They also appear in material handling equipment and in production lines that require simple and robust shaft support.

To choose the housing, consider the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert usually comes with labyrinth or contact seals; if the environment is very dirty, additional protection is advisable. Mounting is done on a flat, rigid surface, with the bolts properly tightened and the shaft aligned with the bearing. Factory lubrication can be replenished through the grease fitting if the insert includes one.

Y-bearing housings with insert bearings from different brands share standardized dimensions, so they are often interchangeable. If you have the part number from another brand or an unidentified part, send us the data and we will indicate the compatible equivalent. Interchangeability depends on the shaft diameter, the hole spacing and the insert fixing type, so it is advisable to verify these points before replacing.

If you need a quote for a Y-bearing housing with PEER insert bearing, send the part number by WhatsApp to MR Accesorios Industriales. We will quote the exact size shown on your equipment or the one you are looking for. With more than 80 years in the industry, in Buenos Aires, Argentina, we advise you so you can choose the right unit for your application.