PEER GRLP206-18 pillow block bearing

PEER GRLP206-18 is a reference of pillow block bearing, within Bearing housings. Request a quote for GRLP206-18 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The GRLP pillow block is a pillow block mounted bearing from the PEER line. It consists of a cast iron housing with two base holes and a ball insert bearing with an extended inner ring, which is fixed to the shaft by means of set screws. It is used to support shafts in transmission and conveying equipment, where a self-aligning unit with simple mounting is required. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The GRLP designation identifies the series of pillow blocks with PEER insert bearing. The number following the GRLP prefix indicates the size: for example, GRLP204-12 and GRLP204-13 correspond to the same shaft diameter in inches with different tolerance, while GRLP205-13, GRLP205-14, GRLP205-15 and GRLP205-16 cover size variants for size 205. The numeric suffixes after the hyphen allow you to choose the exact fit to the shaft. To select the correct part number, have the shaft diameter and the mounting hole spacing on hand.

These pillow blocks are used in conveyors, belts, elevators, mixers, fans and process equipment. In Argentina they are common in food, cement and mining plants and in the field, where dust and humidity demand robust units. The gray cast iron housing withstands radial loads and some axial thrust, and the ball insert with contact seal retains lubricant and blocks contaminants. The flat base with two holes allows mounting on sheet metal structures or steel profiles without additional machining.

To choose well, check the shaft diameter, the radial load and the rotation speed. The insert bearing has normal internal clearance and is fixed with set screws on the extended inner ring; tighten them with the appropriate wrench and lock the nut. Lubrication is with general-purpose lithium grease and it should be renewed according to the environment. Before mounting, align the base holes with the structure and make sure the shaft turns freely. Slight misalignment is compensated by the insert clearance, but it does not replace good leveling.

PEER GRLP pillow blocks are interchangeable with other brands of pillow blocks with insert bearing that share the same shaft diameter and the same hole spacing. When requesting a quote, indicate the full part number, for example GRLP206-17, and the shaft dimensions. If you have an unidentified part, send a photo and the main dimensions: we will tell you the compatible equivalent. MR Accesorios Industriales sells the PEER line and also manufactures split plummer block housings, ANSI roller chains and pulleys.

To request a quote for your GRLP pillow block, write to us via WhatsApp with the part number or the shaft dimensions and the hole spacing. We will reply shortly with the alternative you need. MR Accesorios Industriales, Buenos Aires, Argentina.