PEER GRC210-50mm cartridge bearing

PEER GRC210-50mm is a reference of cartridge bearing, within Bearing housings. Request a quote for GRC210-50mm via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Y-bearing housing with PEER GRC series insert bearing is a cartridge mounted bearing: a compact unit that combines a cartridge-shaped outer ring and an insert ball bearing, ready to mount on shafts and housings. It is used to guide rotating shafts in equipment where a simple mounting solution and good alignment capability are needed. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and will quote it for you on WhatsApp with the exact code.

The GRC series designation is read by the number that follows the letters: it identifies the insert bearing size and therefore the shaft diameter. The examples GRC204-20mm, GRC205-25mm, GRC206-30mm, GRC207-35mm, GRC208-40mm, GRC209-45mm, GRC210-50mm and GRC211-55mm show that progression: the higher the number, the larger the shaft diameter. The suffix in millimeters indicates the bore size of the insert, so the complete code tells you which shaft the unit accepts. If you have the code at hand, send it as is to request a quote.

These housings are seen in belt conveyors, bucket elevators, packaging belts, mixers, fans and process lines in food, chemical and bulk material plants. In Argentina they are common in material handling equipment and in machines where the shaft rotates at moderate speeds and loads are not extreme. The cartridge shape allows them to be mounted in cylindrical housings or in split plummer block housings, and their self-aligning design helps absorb small shaft misalignments.

To choose well, take into account the shaft diameter, the load type and the environmental conditions. The insert sealing defines whether the unit withstands dust, humidity or frequent washdowns: in dirty environments a more closed protection is advisable. Lubrication comes from the factory and, depending on use, may require replenishment with compatible grease. When mounting, verify that the housing is clean and free of burrs, that the shaft is not worn in the support area and that alignment is correct so as not to overload the insert.

As for equivalences, cartridge mounted bearings are interchanged between manufacturers by series number and shaft size: a code from another brand with the same diameter and configuration can replace the PEER unit. For that, it is worth comparing the complete designation, the shaft diameter and the sealing type. If you bring the original part code or a photo of the nameplate, we will tell you the equivalent PEER reference and quote it for you.

If you need to replace a Y-bearing housing with PEER GRC series insert bearing, send us the complete code or the shaft size you use by WhatsApp. We will quote the exact reference and get back to you shortly. MR Accesorios Industriales works with this line so you can resolve the replacement without hassle.