Flange bearing 4 holes NSK UKFCX13D1;HS2313X

NSK UKFCX13D1;HS2313X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFCX13D1;HS2313X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Y housing with NSK UKFCX insert bearing is a four-bolt flanged unit that combines a cast iron housing with a spherical roller insert bearing. It is used to mount rotating shafts on flat structures, where the flange is secured with four bolts and the insert is fastened to the shaft. It is a compact, easy-to-mount solution for transmission and conveying equipment in industrial plants in Buenos Aires, Argentina and throughout the country.

The UKFCX designation identifies the series: UK indicates the insert bearing with adapter sleeve, FC corresponds to the four-bolt flanged housing and X indicates a reinforced section. The number that follows —08, 09 or 13 in the examples UKFCX08D1, UKFCX09D1 and UKFCX13D1— refers to the shaft diameter. The D1 suffix defines the sealing type and the tolerances of the insert. In the case of HS2308X, HS2309X and HS2313X, the HS code designates the adapter sleeve corresponding to each size.

These units are used in belt conveyors, bucket elevators, mixers, mills and process equipment. In Argentina they are common in food, cement, paper and aggregate processing plants, where the environment often has dust, humidity or frequent washdowns. The four-bolt flange allows the unit to be secured to sheet metal or a steel structure, with the shaft perpendicular to the mounting plane, and facilitates disassembly for maintenance without dismantling the entire equipment.

To choose the unit, verify the shaft diameter, the expected radial and axial load, and the environmental conditions. The D1 seal protects against contaminants and lubricant loss; in very dirty environments it is advisable to check the condition of the lips frequently. Mounting requires the flange to rest flat and the four bolts to be tightened evenly to prevent deformation. The insert is secured to the shaft with the HS sleeve, which must be tightened to the recommended torque to ensure concentricity and prevent relative rotation.

When replacing a unit, you may find equivalent codes from other brands with the same flange arrangement and shaft diameter. Interchangeability depends on the housing dimensions, the hole positions and the insert mounting type. If you have the code from another brand or an unidentified part, send us the data and at MR Accesorios Industriales we will indicate the compatible alternative or quote the exact size you need.

To proceed with the quote, send the complete code by WhatsApp —for example UKFCX08D1 or HS2308X— or the shaft and flange dimensions. At MR Accesorios Industriales we will quote you promptly and advise you on the option that best suits your equipment. You can also ask about other series of housings and insert bearings that we sell.