Flange bearing 4 holes NSK UKFCX13D1;HA2313

NSK UKFCX13D1;HA2313 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKFCX13D1;HA2313 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange housing with UKFCX series insert bearing is a mounted unit ready to bolt onto a flat surface. It is used to support shafts in equipment where firm mounting and a bearing that allows rotation with slight misalignment are required. MR Accesorios Industriales sells this NSK line in Buenos Aires, Argentina, and will quote it for you on WhatsApp with the full part number.

The UKFCX designation is read in parts: UK indicates the insert bearing with adapter sleeve, FC corresponds to the 4-bolt flange housing, and X indicates a series variant. The D1 suffix appears in examples UKFCX09D1;HA2309, UKFCX10D1;HA2310 and UKFCX11D1;HA2311, and the number following UKFCX (09, 10, 11, 13, 15, 16) identifies the insert size. The accompanying HA code, such as HA2309 or HA2316, corresponds to the associated adapter sleeve. To request a quote, send us the full part number exactly as it appears on the equipment.

These housings are found in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. They also appear in woodworking, textile and waste treatment machinery, where flange mounting simplifies fastening to chassis or frames. In Argentina they are common in packaging lines and in material handling equipment working with horizontal shafts and moderate loads.

To choose correctly, take into account the shaft diameter, the type of load and the direction of the forces. The 4-bolt flange provides stable mounting; the insert with adapter sleeve allows mounting on an unmachined shaft and tolerates some misalignment. Check the sealing according to the environment: dust, water or frequent washdowns require additional protection. The insert is lubricated through the built-in grease fitting, and it is advisable to align the housing before tightening the flange bolts so as not to stress the bearing.

As for equivalents, mounted housing part numbers vary between manufacturers even though the function is the same. If you bring in an unidentified part or another brand's part number, we will indicate the compatible alternative from the UKFCX series. The nomenclature does not need to match: the shaft diameter and the flange type are enough to find the unit that replaces the original.

If you need this flange housing with insert bearing, send us the UKFCX part number or the shaft diameter on WhatsApp. At MR Accesorios Industriales we will quote the exact reference and get back to you shortly. You can also ask us about the associated HA adapter sleeve or the insert separately.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.