Flange bearing 4 holes NSK UKFCX12D1;H2312X

NSK UKFCX12D1;H2312X is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKFCX12D1;H2312X via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UKFCX housing with NSK insert bearing is a 4-bolt flange mounted bearing unit, ready to be fixed to the structure with four bolts. It is used to support rotating shafts in equipment where a compact, easy-to-mount unit is needed. The UKFCX series combines a cast iron housing with an insert bearing from the UK line, which is fixed to the shaft using an adapter sleeve. MR Accesorios Industriales sells this line for industrial applications in Buenos Aires, Argentina.

The UKFCX designation is read in parts: UK identifies the insert bearing with sleeve, FC the 4-bolt flange housing, and X the locking type. The examples UKFCX05D1;H2305X, UKFCX06D1;H2306X and UKFCX07D1;H2307X show that the number following UKFCX indicates the insert size, while the code H2305X, H2306X or H2307X corresponds to the adapter sleeve that locks the bearing to the shaft. The D1 suffix indicates a construction variant of the insert. Thus, each assembly is defined by the housing size and the corresponding sleeve.

These housings are used in conveyors, belts, elevators, mixers, fans and continuous process machines. In Argentina, they are common in food plants, cement plants, tanneries and metalworking shops, where mounting with a sleeve simplifies replacement on stepped shafts. They also appear in pumping equipment and packaging lines, because the 4-bolt flange allows rigid fixing and simple alignment with the existing structure.

To choose the housing, take into account the shaft diameter and the sleeve that goes with it: the assembly UKFCX05D1;H2305X, UKFCX06D1;H2306X or UKFCX07D1;H2307X already includes the insert and the sleeve for that shaft. The insert's sealing protects against dust and moisture, and lubrication is done through the housing's grease fitting. During mounting, tighten the sleeve with the lock nut and lock washer, check that the flange sits evenly and align the shaft before tightening the bolts. Poor alignment shortens the bearing's life.

If you need to replace a unit from another brand, the most practical approach is to compare the complete designation: UKFCX with the size number and the corresponding H sleeve. Equivalent series from other manufacturers usually share flange dimensions and shaft diameter, but always verify the exact code before ordering. At MR Accesorios Industriales we quote you the UKFCX assembly with the sleeve you need and tell you the compatible alternative if you bring us the code of the original part.

To move forward, send us on WhatsApp the complete code shown on the housing or on the equipment's nameplate: for example, UKFCX08D1;H2308X or UKFCX09D1;H2309X. With that information we will quote you promptly. If the housing is mounted and the code cannot be read, send us the shaft diameter and the distance between the flange holes, and we will tell you which unit corresponds.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.