Flange bearing 4 holes NSK UKFCX11D1;HS2311

NSK UKFCX11D1;HS2311 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKFCX11D1;HS2311 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange housing with UKFCX series insert bearing from NSK is an assembled unit that combines a cast iron housing with a cylindrical roller insert bearing, mounted on a shaft by means of an adapter sleeve. It is used to support shafts on flat structures, with the flange bolted to the frame. Its design allows mounting and dismounting without axial access, which simplifies maintenance on equipment where the shaft is already installed.

The UKFCX designation is read in parts: UK indicates the insert bearing with adapter sleeve; FCX corresponds to the 4-bolt flange of reinforced section; the number that follows identifies the shaft diameter. The suffix D1 indicates a construction variant of the insert. In the examples, UKFCX06D1;HS2306 combines the UKFCX06 housing with the HS2306 adapter sleeve, and so on with UKFCX07D1;HS2307, UKFCX10D1;HS2310, UKFCX11D1;HS2311 and UKFCX12D1;HS2312. The HS adapter sleeve is selected according to the shaft diameter and is supplied together with the assembly.

These housings are used in belt conveyors, bucket elevators, mills, mixers, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. In Argentina they appear in packaging lines, conveyor belts in grain plants and industrial ventilation systems. The 4-bolt flange allows them to be fastened to walls or frames with aligned holes, and their robust construction absorbs moderate combined radial and axial loads.

To select the housing, check the shaft diameter, the expected radial and axial load, and the environmental conditions. The insert seal protects against dust and moisture; in environments with water or frequent washing, additional protection is advisable. The adapter sleeve must be tightened with the proper wrench and the flange aligned with the frame to avoid parasitic stresses. Factory lubrication can be supplemented according to the duty cycle, and the internal clearance of the bearing does not require subsequent adjustment.

When replacing a housing from another brand, interchangeability is defined by the shaft diameter, the flange type and the mounting dimensions. Equivalent series from different manufacturers may differ in the locking system or the sealing, so it is important to compare the complete designation and the flange dimensions. If the original code is not available, the part can be identified by its main dimensions and the insert type.

To request a quote for the UKFCX housing you need, send the complete code by WhatsApp to MR Accesorios Industriales. If you have doubts about the designation or the corresponding adapter sleeve, send a photo of the part or the shaft and flange dimensions, and we will tell you the exact reference. We can also advise you on lubrication and mounting so that the assembly works correctly from the first day.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.