NSK UKFCX07D1;H2307X flange bearing 4 holes

NSK UKFCX07D1;H2307X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFCX07D1;H2307X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UKFCX housing with NSK insert bearing is a 4-bolt flange mounted bearing unit, ready to be fixed to the structure with four bolts. It is used to support rotating shafts in equipment where a compact, easy-to-mount unit is required. The UKFCX series combines a cast iron housing with a UK series insert bearing, which is fixed to the shaft by means of an adapter sleeve. MR Accesorios Industriales sells this line for industrial applications in Buenos Aires, Argentina.

The UKFCX designation is read in parts: UK identifies the insert bearing with adapter sleeve, FC the 4-bolt flange housing, and X the locking type. Examples UKFCX05D1;H2305X, UKFCX06D1;H2306X and UKFCX07D1;H2307X show that the number following UKFCX indicates the insert size, while the H code corresponding to the adapter sleeve locks the bearing to the shaft. The D1 suffix indicates a construction variant of the insert. Thus, each assembly is defined by the housing size and the corresponding adapter sleeve.

These housings are used in conveyors, belts, elevators, mixers, fans and continuous process machines. In Argentina, they are common in food plants, cement plants, tanneries and metalworking shops, where mounting with an adapter sleeve simplifies replacement on shafts without a shoulder. They also appear in pumping equipment and packaging lines, because the 4-bolt flange allows rigid fixing and simple alignment with the existing structure.

To choose the housing, take into account the shaft diameter and the adapter sleeve that goes with it: the UKFCX assembly with the size number and the corresponding H adapter sleeve already includes the insert and the adapter sleeve for that shaft. The insert seal protects against dust and moisture, and lubrication is done through the housing grease fitting. During mounting, tighten the adapter sleeve with the lock nut and lock washer, check that the flange sits evenly and align the shaft before tightening the bolts. Poor alignment shortens bearing life.

If you need to replace a unit from another brand, the most practical approach is to compare the complete designation: UKFCX with the size number and the corresponding H adapter sleeve. Equivalent series from other manufacturers often share flange dimensions and shaft diameter, but always verify the exact code before ordering. At MR Accesorios Industriales we quote the UKFCX assembly with the adapter sleeve you need and indicate the compatible alternative if you bring the code of the original part.

To move forward, send us via WhatsApp the complete code shown on the housing or on the equipment plate: for example, UKFCX08D1;H2308X or UKFCX09D1;H2309X. With that information we will quote you shortly. If the housing is mounted and the code cannot be read, send us the shaft diameter and the distance between flange holes, and we will indicate the corresponding unit.