NSK UKFCX06D1;HE2306X flange bearing 4 holes
- Brand
- NSK
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- UKFCX
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
NSK UKFCX06D1;HE2306X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFCX06D1;HE2306X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The NSK UKFCX Y-bearing unit is a 4-bolt flange housing with an insert bearing, ready to mount. It is used to support rotating shafts in equipment where front mounting with good rigidity and alignment is required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and will quote the exact part number you need via WhatsApp.
The UKFCX designation combines the flange housing series with the insert bearing. The number that follows indicates the housing size, which corresponds to a specific shaft diameter. The D1 suffix identifies sealing and insert design variants. In codes with HE, such as HE2306X, the reference points to the associated adapter sleeve. Knowing these parts helps you order the complete unit or the correct replacement.
These housings appear in conveyors, belts, mixers, blowers and packaging lines. In Argentina they are seen in food, chemical and aggregate plants, where the environment may contain dust or moisture. The 4-bolt flange allows them to be mounted on sheet metal or structure with simple alignment. Being sealed units, they simplify maintenance and reduce the risk of bearing contamination.
To choose correctly, look at the shaft diameter and the mounting type. The UKFCX insert accepts mounting with a taper sleeve, which facilitates adjustment and removal. Check that the flange has the necessary rigidity and that the mounting surface is flat. Lubrication comes from the factory; in service, follow the greasing schedule according to the conditions. Alignment between housings prevents side loads and extends service life.
If the original code is from another brand, we can cross-reference it and offer you the equivalent unit. Interchangeability between manufacturers is based on the main dimensions and the insert type, not on the exact code. Send us the code or the shaft size and we will indicate the compatible alternative. We also have split plummer block housings and in-house manufactured pulleys to complete your equipment.
Send the UKFCX code you need, the shaft size or a photo of the part via WhatsApp. At MR Accesorios Industriales we will quote the unit or the replacement and get back to you shortly. We know how to interpret what the equipment needs.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the D1 suffix mean on UKFCX housings?
- The D1 suffix identifies a design variant of the insert bearing, generally associated with the sealing type and mounting configuration. It does not change the main dimensions of the unit. If your equipment calls for D1, send us the complete code and we will quote the equivalent version.
- How do I know what shaft size I need for my housing?
- The number that follows UKFCX indicates the housing size, which corresponds to a specific shaft diameter. If you are not sure, measure the shaft with a caliper and send us the measurement; we will indicate the corresponding code.
- Can I replace a housing from another brand with an NSK UKFCX?
- Yes, as long as the flange dimensions, shaft diameter and insert type match. Interchangeability is defined by standardized dimensions, not by the manufacturer's code. Bring us the original code or the measurements and we will offer you the compatible unit.