Flange bearing 4 holes NSK UKFC215D1;HA2315

NSK UKFC215D1;HA2315 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for UKFC215D1;HA2315 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UKFC housing with NSK insert bearing is a four-bolt flange unit that combines a cast iron housing with an insert bearing, either spherical roller or ball, depending on the series. It is used to mount rotating shafts on flat structures, with fixed alignment and easy replacement. It is a robust power transmission solution for industrial plants, where radial loads and some axial thrust must be supported. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The UKFC designation is read in parts: UK indicates the insert bearing with adapter sleeve, FC corresponds to the square four-bolt flange, and the number that follows —209, 210, 211, 213, 215, 216— indicates the shaft diameter in millimeters according to the series table. The D1 suffix identifies sealing and tolerance variants specific to the line. In the examples, UKFC209D1;HA2309 combines the housing with the HA2309 adapter sleeve, which adapts the bore to the corresponding shaft. Understanding this logic lets you order the complete assembly without mistakes.

These housings are used in conveyors, mixers, mills, centrifugal pumps, fans and process equipment. In Argentina they are common in food, chemical, cement and agro-industrial plants, where mounting on sheet metal or steel structures requires a firm flange and a bearing that withstands the weather. They also appear in old machines being reconditioned, because the cast iron housing can be re-machined and the insert can be replaced without completely disassembling the shaft.

To select correctly, take into account the shaft diameter, the expected radial and axial load, and the working environment. The insert's sealing determines whether it withstands dust, water or frequent washdowns; in applications with a lot of dirt, it is advisable to choose the variant with a reinforced seal. Lubrication of the insert bearing is permanent in most cases, but at high temperatures or speeds it is recommended to check the type of grease. Aligning the flange with the structure is key: a twisted flange accelerates wear on the insert and the shaft.

As for equivalents, NSK UKFC housings interchange with units from other brands that use the same square flange and adapter sleeve nomenclature, such as the SYK, FY or UC series from different manufacturers. Interchangeability depends on the flange dimensions, the hole spacing and the shaft diameter; therefore it is advisable to compare drawings or full part numbers. If you have another brand's part number, send it and we will indicate the compatible alternative. MR Accesorios Industriales sells the NSK line and also manufactures split plummer block housings and pulleys.

If you need a UKFC with insert bearing, send the part number or model on WhatsApp. We will quote it shortly and advise you on the variant that best suits your equipment. We have been working in the industry for more than 80 years and we know the typical applications of Argentine industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.