NSK UKFC213D1;HS2313X flange bearing 4 holes

NSK UKFC213D1;HS2313X is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for UKFC213D1;HS2313X via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UKFC housing with NSK insert bearing is a 4-bolt flange unit that combines an insert bearing with a cast iron housing. It is used to support rotating shafts on flat structures, with front mounting and fastening by four bolts. It is a compact solution with easy alignment for equipment where rigidity and protection against contaminants are required.

The UKFC designation reads as a family of flange housings with insert bearing. The number that follows indicates the size, according to the code. The D1 suffix identifies variants of sealing and insert design. In the examples, the HS codes are the associated inserts, with their own series and diameter nomenclature.

These units are used in conveyors, belts, elevators, mixers, fans and agricultural machinery. In Argentina they appear in food plants, cement plants, cold storage facilities and metalworking shops, where wall or structural sheet mounting simplifies installation and maintenance. Their four-bolt flange allows firm fastening and quick replacement of the insert without disassembling the housing.

To select, check the shaft diameter and the type of load: radial, axial or combined. The insert sealing must be chosen according to the environment: dust, humidity or frequent washdowns. During mounting, align the flange holes and tighten the bolts in a cross pattern. Lubricate the insert according to the duty cycle and check the axial clearance. Correct alignment extends bearing life and prevents vibration.

UKFC housings are interchangeable between brands that use the same nomenclature and flange dimensions. If the customer brings the code of another brand, the equivalent can be found by shaft dimensions, hole spacing and outer diameter. MR Accesorios Industriales sells the NSK line and can guide the substitution, always respecting the tolerances and the original sealing type.

To request a quote for the UKFC housing with NSK insert bearing, send the complete code via WhatsApp, for example UKFC208D1 or HS2308X, or the shaft and flange dimensions. At MR Accesorios Industriales we reply promptly with the alternative you need.