Industrial pulley 380 mm, 8 grooves, section C

EMMAR POLEA 380 8C is a pulleys reference, within Power transmission. Request a quote for POLEA 380 8C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 380 mm industrial pulley with 8 grooves, section C, is a power transmission component mounted on a machine shaft to transmit motion through V-belts. Its diameter and number of grooves make it suitable for equipment that needs to distribute the load across several belts, such as fans, compressors, pumps and conveyors. It is an in-house manufactured part, EMMAR Accesorios Industriales brand, designed to be integrated into demanding transmission systems.

This item is a pulley with a 380 mm diameter, 8 grooves and section C. Its commercial designation is POLEA 380 8C. Section C corresponds to a medium-to-large V-belt profile, and the eight grooves allow power to be distributed across several belts in parallel, which reduces the individual load on each one and improves drive continuity. It is an in-house manufactured part, EMMAR brand, produced locally under our own quality control.

Typical applications for a pulley of this type are in belt-driven equipment where a considerable diameter and several grooves are required: industrial fans, screw compressors, high-flow centrifugal pumps, belt conveyors and mills, among others. It is also used in agricultural machinery and in process lines where the drive or driven shaft needs a specific transmission ratio and a large contact surface with the belts.

For assembly, check that the shaft diameter and keyway match the pulley bore, and that the alignment between pulleys is correct to avoid uneven belt wear. The number of grooves must be equal to or greater than that of the original equipment, and the belt section must match that of the pulley. If you are replacing an existing pulley, take the measurements of the outer diameter, overall width, bore diameter and number of grooves before ordering the part.

If you need a pulley with a different number of grooves, a different diameter or a different section, a nearby size or an equivalent within the same manufacturing line can be evaluated. To do so, send us the part number POLEA 380 8C or the data of the original pulley by WhatsApp: diameter, grooves, section and bore type. With that information we will confirm the part or an alternative compatible with your equipment.

At MR Accesorios Industriales we manufacture pulleys and other power transmission components, and we also supply bearings, housings, seals, bushings, chains and lubricants. If you have doubts about the pulley you need, write to us on WhatsApp with the part number POLEA 380 8C and we will help you identify the correct part for your application.