Industrial pulley 350 mm, 8 grooves, section C

EMMAR POLEA 350 8C is a pulleys reference, within Power transmission. Request a quote for POLEA 350 8C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 350 8C pulley is a V-belt drive pulley manufactured by EMMAR Accesorios Industriales. It has a 350 mm diameter, 8 grooves and section C, which makes it suitable for transmitting power in medium and high-demand equipment. It is used in industrial machines, compressors, mills, conveyor belts and ventilation systems, among other applications. As it is in-house manufacturing, you can ask about machining and finishing variants according to your equipment.

This pulley has a 350 mm diameter, 8 grooves and section C. Section C corresponds to wide-profile V-belts, and the 8 grooves allow the load to be distributed among several belts. The 350 mm diameter defines the transmission ratio when combined with a driving or driven pulley. It is a cast iron or machined steel part, depending on the use, and is mounted on cylindrical or tapered shafts. To confirm the type of bushing or keyway, check the manufacturer's product page.

Typical applications of an 8-groove section C pulley are equipment that requires transmitting power with several belts in parallel: screw compressors, mills, mixers, conveyor belts, industrial fans and high-flow pumps. It is also used in agricultural machines and continuous process equipment. In all cases, the number of grooves and the diameter are chosen based on the power to be transmitted and the shaft speed.

To mount and select this pulley, take into account the shaft diameter, the type of fixing (keyway, taper bushing or press fit), the distance between grooves and the alignment with the driving pulley. Section C requires belts of the same profile and adequate tension to prevent slipping and wear. Verify that the pulley is perpendicular to the shaft and that the grooves are clean and free of burrs. If the equipment works with reversing rotation or pulsating loads, ask about balancing.

If you need an equivalent pulley or a nearby size, send us the full part number, the number of grooves and the current diameter. It also helps if you tell us the shaft diameter and the type of fixing. With that data we can see if there is a pulley in our manufacturing line that fits or if it is better to machine one to measure. You do not need to have the original brand: we work with dimensional equivalents.

To request a quote for this 350 8C pulley or ask about another size, send the part number by WhatsApp to MR Accesorios Industriales. We will reply with the machining alternatives. If you have doubts about the section or the number of grooves, attach a photo of the old pulley or the equipment. That way we can advise you so that the new pulley fits the shaft and transmits power without problems.