Industrial pulley 360 mm, 6 grooves, section C

EMMAR POLEA 360 6C is a reference of pulleys, within Power transmission. Request a quote for POLEA 360 6C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 360 6C pulley is a V-belt drive pulley, manufactured by EMMAR Accesorios Industriales. It has a 360 mm diameter, 6 grooves and section C, which makes it suitable for transmitting power in medium to high demand equipment. It is used in machines that need to maintain speed with good belt grip and dissipate heat. As it is in-house manufactured, you can ask about machining and balancing variants for your application.

This item is a pulley with a 360 mm diameter, 6 grooves and section C. The designation POLEA 360 6C summarizes those three variables: the outer diameter, the number of grooves and the belt profile. Section C corresponds to wide-profile V-belts, typical of drives with significant loads. Multiple grooves allow power to be distributed among several belts, which reduces the load per groove and improves the reliability of the assembly.

It is used in industrial machine drives: compressors, fans, pumps, mills, conveyor belts and process equipment. It also appears in the drive of mixers, screens and elevators. In all cases, it is advisable to verify that the driving and driven pulleys share the same section and that the number of grooves is equal or compatible. The 360 mm pulley with 6 grooves is chosen when torque needs to be transmitted with a moderate transmission ratio and good belt wrap.

For assembly, check that the shaft and keyway are clean and free of burrs, and that the pulley fits without being struck. Align the pulleys with a straightedge or laser to avoid uneven wear of belts and grooves. Belt tension is adjusted according to the equipment manual or the belt manufacturer's recommendation; excessive tension stresses bearings and low tension causes slipping. If the pulley operates at high revolutions, balancing should be evaluated. At MR we can machine the bore, keyway and fastening system according to your shaft.

If you need an equivalent pulley, send us the part number POLEA 360 6C or the data of the original pulley: diameter, number of grooves, section and bore type. A photo of the part and the shaft also works. With that data we propose the compatible in-house manufactured pulley or machine it to measure. You don't need to have the exact part number: with the section and main dimensions we can guide you.

To request a quote for this pulley or ask about a variant, write to us on WhatsApp and send us the part number POLEA 360 6C. MR Accesorios Industriales manufactures pulleys, split plummer block housings and ANSI chains, and sells bearings, power transmission, seals, bushings, mounting tools and lubricants. We advise you so that the pulley you choose works with the correct belt and shaft.