Industrial pulley 340 mm, 6 grooves, section C

EMMAR POLEA 340 6C is a pulleys reference, within Power transmission. Request a quote for POLEA 340 6C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 340 6C pulley is a V-belt drive pulley manufactured by EMMAR Accesorios Industriales. It has a 340 mm diameter, 6 grooves and section C, which makes it suitable for transmitting power in equipment that requires several belts in parallel. It is used in mills, mixers, compressors, pumps and industrial fans. Because it is in-house manufactured, the bore and keyway can be adapted to the equipment's requirements. We invite you to request a quote by WhatsApp.

This pulley has a 340 mm diameter, 6 grooves and section C. Section C corresponds to wide-profile V-belts, and the 6 grooves allow up to six belts to be mounted in parallel to distribute the load. The 340 mm diameter defines the transmission ratio when combined with the driven pulley. It is a cast iron or machined steel part, with ground grooves for correct belt seating. It is manufactured at MR and identified with the part number POLEA 340 6C.

Typical applications for a pulley of this size and number of grooves are high-demand equipment: mills, mixers, screw compressors, large centrifugal pumps, industrial fans and heavy machinery drives. In all cases the goal is to transmit high torque with several belts to reduce the individual load on each one and increase the service life of the assembly. It is also used as a drive or driven pulley in systems where a specific transmission ratio is required.

To correctly select this pulley, take into account the pitch diameter, the number of grooves and the belt section. Section C requires grooves with a standardized profile; verify that the belt is of that section. Mounting requires that the bore and keyway match the shaft. If the shaft is different, the bore can be machined to the required size. Also check the alignment between pulleys to avoid uneven wear of belts and bearings.

If you need an equivalent pulley or a nearby size, the most practical thing is to send us the part number POLEA 340 6C or the data of the original pulley: diameter, number of grooves, section and shaft diameter. With that data we can offer you an in-house manufactured pulley with the same performance or the size that best suits your equipment. We can also manufacture to measure if space allows.

To request a quote for this pulley or ask about a variant, send the part number POLEA 340 6C by WhatsApp to MR Accesorios Industriales. We will reply with the machining options. If you have doubts about the equivalence with another brand, attach a photo or the data of the original part and we will advise you.