Industrial pulley 200 mm, 5 grooves, section C

EMMAR POLEA 200 5C is a pulleys reference, within Power transmission. Request a quote for POLEA 200 5C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 200 5C pulley is a V-belt drive pulley, section C, with a 200 mm diameter and 5 grooves. It is used to drive shafts from a motor, distributing power across several belts to spread the load. It is in-house manufactured, EMMAR Accesorios Industriales brand, which allows the machining to be adjusted to the size and keyway type required by each piece of equipment. It is mounted on machines that run many hours a day and need a balanced pulley with well-defined grooves.

This item is a pulley with a 200 mm diameter, 5 grooves and section C. The designation POLEA 200 5C summarizes those three data points: the 200 mm outside diameter, the number of grooves (5) and the belt section it takes, C. The grooves are machined so that the V-belt seats evenly and does not slip or wear on one side only. The part is manufactured at MR and is supplied with the bore and keyway according to what the shaft it is mounted on requires.

It is used in drives where a shaft has to be driven with several belts in parallel: compressors, centrifugal pumps, plant fans, mills, mixers and conveyor lines. It also appears in factory equipment and in agricultural or road machinery that works under heavy load and frequent starts. With 5 grooves, it allows the effort to be spread across five belts, which lowers the tension on each one and extends the life of the assembly.

To choose it correctly, take into account the shaft diameter, the keyway length and the center distance of the equipment. Check that the belt section is C and that the number of grooves matches the drive pulley. During installation, align the pulleys with a straightedge or a laser, tension the belts according to the manufacturer's manual and check that the grooves are parallel. A misaligned pulley wears out belts and bearings within a few weeks.

If you need a nearby size, a different diameter or a different number of grooves, send us the part number POLEA 200 5C and the shaft data. With that we look for or manufacture the equivalent pulley. We can also quote the drive pulley and the driven pulley as a pair, so that the transmission ratio is balanced. If you have the old pulley on hand, send us the diameter, the grooves and the section, and we will cross-reference it with the designation.

MR Accesorios Industriales manufactures this pulley in its factory and sells it together with belts, housings and bearings for power transmission. If you want to confirm the size or request a variant, write to us on WhatsApp with the part number POLEA 200 5C and we will reply with the quote.