Industrial pulley 180 mm, 5 grooves, section C

EMMAR POLEA 180 5C is a pulleys reference, within Power transmission. Request a quote for POLEA 180 5C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 180 5C pulley is a V-belt drive pulley manufactured by EMMAR Accesorios Industriales. It has a 180 mm diameter and 5 grooves for section C belts. It is used to transmit power between parallel shafts in industrial equipment, with the advantage of allowing several speed ratios depending on the combined diameters. Because it is in-house manufactured, the machining can be adjusted to suit the equipment's needs.

This pulley has a 180 mm outside diameter and 5 grooves for section C V-belts. Section C corresponds to wide-profile belts, suitable for transmitting high power at moderate drive ratios. The 180 mm diameter and the 5 grooves allow a drive train of up to five belts in parallel, which distributes the load and reduces wear. The material and treatment are defined during machining according to the intended use.

It is used in industrial machines such as compressors, centrifugal pumps, fans, mills, conveyor belts and process equipment. It is also common in the drive of water pumps, blowers and mixers. As a section C pulley, it is used in applications where high torque must be transmitted with few belts, or where the space between shafts is limited and a single pulley with several grooves is sought.

To select it correctly, take into account the pitch diameter, the number of grooves and the belt section. Check that the diameter of the driving and driven pulleys gives the desired drive ratio. Check the alignment between pulleys and the belt tension: misalignment accelerates groove wear. If the equipment works with variable loads, it is advisable to oversize the number of grooves or use a larger diameter to reduce belt tension.

If you need a pulley with another size, another number of grooves or a different section, it can be manufactured to order. To do so, provide the outside diameter, the pitch diameter, the number of grooves and the belt type. If you have an old pulley, send a photo or a sketch with the measurements taken with a caliper. Keyways, mounting holes and hubs can also be machined according to the shaft where it is mounted.

To request a quote for this pulley or a variant, send the part number MR-POLEA-C5-180 by WhatsApp to MR Accesorios Industriales. If you need advice on the drive ratio or mounting, the technical team can help you define the best option for your equipment.