Product page
Industrial pulley 200 mm, 3 grooves, section C
- Manufacturer Part Number
- POLEA 200 3C
- Brand
- EMMARIn-house manufacturing
- Category
- Power transmission
- Subcategory
- Pulleys
- Series
- Sección C
In-house manufacturing
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
EMMAR POLEA 200 3C is a pulleys reference, within Power transmission. Request a quote for POLEA 200 3C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The PULLEY 200 3C is a power transmission pulley of in-house manufacturing, EMMAR Accesorios Industriales brand, with 200 mm diameter, 3 grooves and section C. It is used to transmit motion from a motor to one or more shafts by means of V-belts, in installations where speed needs to be multiplied or reduced and the load distributed among several grooves. It is a part designed for continuous service in plants and workshops.
This pulley has 200 mm diameter, 3 grooves and section C. Section C corresponds to wide-profile V-belts, and the 3 grooves allow mounting three belts in parallel on the same pulley. The 200 mm diameter defines the transmission ratio when combined with another pulley of the same system. It is a pulley of in-house manufacturing, EMMAR brand, designed for machine shafts and belt drive equipment.
It is used in industrial fans, compressors, centrifugal pumps, mills, mixers, conveyor belts and machine tools. It also appears in refrigeration equipment and field transmissions where power must be distributed among several grooves to avoid overloading a single belt. It is common in installations that already work with section C and need to replace a worn pulley or build a new assembly.
To mount it, check that the shaft diameter and keyway match the pulley bore, and that the pulley is aligned with the driving pulley. The number of grooves must be equal to or greater than that of the pulley commanding the system, and the belt section must be C. Check the condition of the grooves: a worn or burred groove wears the belt and generates vibration. If the pulley will work at high speeds, consult us about balancing.
If you need an equivalent pulley or a nearby size, send us the code PULLEY 200 3C or the designation of the original pulley. We can verify if there is a pulley of another diameter or another number of grooves that suits your transmission. It is also convenient to give us the belt section, the shaft diameter and the desired transmission ratio. With that data we will guide you on the most convenient option.
MR Accesorios Industriales manufactures pulleys, split plummer block housings and ANSI chains, and sells bearings, power transmission, seals, bushings, mounting tools and lubricants. If you want to request a quote for this pulley or ask about a different size, write to us on WhatsApp with the code PULLEY 200 3C and we will respond with the technical information you need.
Dimensions
- Size
- 200mm
- Grooves
- 3
- Section
- C
Frequently Asked Questions
- What does it mean that it is section C?
- Section C is the V-belt profile that fits in the grooves of this pulley. It is not compatible with belts of section A, B or D. To assemble the set, the belt and the pulley must be of the same section.
- Can I use this pulley with fewer belts?
- Yes, you can mount one, two or three belts depending on the power to be transmitted. The important thing is that the driving pulley has the same number of grooves or more, and that all belts have the same tension.
- How do I order a pulley of another size?
- Send us the code PULLEY 200 3C via WhatsApp and tell us what diameter, number of grooves or section you need. With that data we will tell you if we can manufacture it or if there is an alternative within the transmission line.