Industrial pulley 360 mm, 2 grooves, section C

EMMAR POLEA 360 2C is a reference of pulleys, within Power transmission. Request a quote for POLEA 360 2C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 360 2C pulley is a section C V-belt drive pulley, with two grooves and a 360 mm diameter. It is used to drive machine and equipment shafts where torque must be transmitted with a defined transmission ratio. As it is in-house manufacturing, EMMAR brand, the groove machining and balancing are controlled, two key points so that the belt runs centered and lasts as long as it should.

This item is a pulley with a 360 mm diameter, 2 grooves and section C. The designation POLEA 360 2C summarizes those three data points: size, number of grooves and type of belt it houses. Section C corresponds to wide-profile V-belts, the ones used when high power must be transmitted at medium speeds. The two grooves allow building drives with more than one belt in parallel on the same pulley.

It is often seen in grinding machines, mixers, compressors, process pumps and lifting equipment. Also in transmission lines where the driving and driven shafts are separated and a reduction or multiplication by belts is needed. In manufacturing plants and workshops, it is a common replacement part when a worn pulley is replaced or the transmission ratio of existing equipment is modified.

To choose it correctly, first confirm the section of the belt you are going to use: it must be C. Then verify the pitch diameter your transmission needs and the number of grooves, because how much power you can transmit depends on that. During mounting, the pulley must be aligned with the other one, without eccentricity, and with the belt tensioned as required by the belt manufacturer. A misalignment, even a small one, eats the belt flank and generates vibration.

If you need an equivalent pulley, the fastest way is to send the part number POLEA 360 2C by WhatsApp along with the section, diameter and number of grooves you are looking for. With that data, at MR Accesorios Industriales we review what we have in the in-house manufacturing line and send you the alternative that best fits your machine.

MR Accesorios Industriales manufactures this pulley and others in the power transmission line. If your equipment requires a pulley with a different number of grooves or a different diameter, ask us: manufacturing can be evaluated. Send the part number or a photo of the old pulley by WhatsApp and we will reply with the corresponding option.