Industrial pulley 270 mm, 2 grooves, section C

EMMAR POLEA 270 2C is a pulleys reference, within Power transmission. Request a quote for POLEA 270 2C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 270 2C pulley is a V-belt drive pulley, manufactured by EMMAR in section C with two grooves and a 270 mm diameter. It is used to transmit power between parallel shafts in industrial equipment, where a stable transmission ratio and good belt grip are required. Its construction is steel, machined so that the grooves guide the belt without slipping. It is a part of the power transmission line that MR has manufactured and sold for more than 80 years.

This item is a pulley with a 270 mm diameter, 2 grooves and section C. The designation POLEA 270 2C summarizes those three variables: the outside diameter, the number of grooves and the belt section it accepts. Section C corresponds to wide-profile V-belts, typical of drives with medium to high loads. As it is of in-house manufacturing, EMMAR brand, it is machined with dimensional control so that the grooves keep the correct angle and depth, and the balance is suitable for rotating without vibration.

Typical applications of a section C pulley with two grooves appear in equipment that needs to transmit torque with one or two belts: screw compressors, industrial fans, centrifugal pumps, mills, mixers and conveyors. It is also used in machine tools and in production lines where the drive shaft and the driven shaft are separated. In those cases, the 270 mm pulley allows a given transmission ratio according to the diameter of the matching pulley and the motor speed.

To mount and select this pulley, first check the shaft diameter and the fastening system (keyway, taper bushing or set screw, as applicable). Then, confirm that the belt section is C and that the number of grooves matches the number of belts you are going to use. Alignment between pulleys is key: angular or parallel misalignment accelerates wear on the belt and the grooves. Also check the tension: too low slips, too high punishes the equipment bearings.

If you need a nearby size or an equivalent, the most practical thing is to send us the part number POLEA 270 2C by WhatsApp and tell us what diameter, number of grooves or section you need. We can also evaluate variants with a different diameter or number of grooves within the in-house manufacturing line, EMMAR brand. If you have the original pulley at hand, send us a photo or the shaft and groove measurements, and we will guide you on the option that best fits your equipment.

MR Accesorios Industriales manufactures this pulley and sells it together with the rest of the power transmission line: bearings, housings, ANSI chains, bushings, seals and lubricants. If you want a quote for the POLEA 270 2C or ask about a similar size, write to us by WhatsApp with the part number and we will reply with the technical information you need for your application.