Industrial pulley 180 mm, 2 grooves, section C

EMMAR POLEA 180 2C is a pulleys reference, within Power transmission. Request a quote for POLEA 180 2C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 180 2C pulley is a V-belt drive pulley, manufactured by EMMAR Accesorios Industriales. It has a 180 mm diameter, two grooves and section C, which makes it suitable for driving equipment that requires moderate torque with a single belt or with two in parallel. It is used in fans, compressors, pumps and factory machinery. Because it is in-house manufactured, we can adjust machining and balancing according to the application.

This pulley has a 180 mm outside diameter, 2 grooves and section C. Section C accepts wide-profile V-belts, typical of drives with considerable load. The two grooves allow doubling the torque capacity by using two belts, or keeping one as a spare. The hub and the body are machined in steel, with a keyway and a center bore that is defined according to the equipment shaft. Because it is in-house manufacturing, EMMAR brand, we control diameter, grooves and balancing on every piece.

The most common applications are centrifugal fans, screw compressors, centrifugal pumps, mills, mixers and machine tool drives. It is also used in conveying equipment and in process lines where a fixed and reliable transmission ratio is needed. Due to its diameter and number of grooves, it is a general-purpose pulley in the factory and in the plant. If the equipment works with reversing rotation or frequent starts, it is advisable to verify the torque and the number of belts required.

To select the pulley, take into account the pitch diameter, the belt section, the number of grooves and the shaft diameter. The driving pulley and the driven pulley must share section and grooves so that the belts run aligned. The 180 mm diameter defines the transmission ratio together with the opposite pulley. During assembly, verify that the keyway matches the shaft keyway, that the pulley is perpendicular to the shaft and that the pulleys are aligned with each other. A misalignment, even a slight one, shortens belt life.

If you need a pulley with a different number of grooves, another diameter or a different section, we can manufacture it. Send us the part number POLEA 180 2C or the full designation by WhatsApp, along with the shaft diameter and the belt section you use. We can also quote a similar pulley if space is limited. Because it is in-house manufacturing, we evaluate machining and balancing according to your application. If you have doubts about the pulley that replaces the current one, send us a photo or a sketch with the main dimensions.

To request a quote for the 180 2C pulley, write to us by WhatsApp with the part number and quantity. We will reply shortly with alternatives if you need another size. MR Accesorios Industriales manufactures pulleys, split plummer block housings and ANSI chains, and distributes bearings and power transmission products. With more than 80 years in the industry, we work with factories, industries and distributors throughout the country.