Industrial pulley 210 mm, 10 grooves, section C

EMMAR POLEA 210 10C is a pulleys reference, within Power transmission. Request a quote for POLEA 210 10C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 210 10C pulley is a V-belt drive pulley, manufactured by EMMAR in section C with 10 grooves and a 210 mm diameter. It is used to drive parallel shafts in equipment that requires several belts working together, such as mills, mixers, compressors and conveyors. As it is in-house manufactured, MR controls the machining of the groove and the balancing, two points that define the service life of the belt and the vibration level of the assembly.

This item is a pulley with a 210 mm diameter, 10 grooves and section C. The designation POLEA 210 10C summarizes those three data points: size, number of grooves and belt profile. Section C corresponds to wide-profile V-belts, suitable for transmitting high power in few lines. The ten grooves allow the load to be distributed among several belts, which reduces the individual effort and improves drive continuity when a belt is replaced.

It is used in drives where torque is high and the center distance is limited: mills, horizontal mixers, screw compressors, screens, high-flow pumps and belt conveyors. It also appears in wood machinery, chippers and agricultural pumping equipment. In all cases it is advisable that the driving and driven pulleys share the same section and number of grooves, so that the belts work with the same tension and uneven wear is not generated.

For mounting, check that the shaft and keyway are clean and free of burrs, and that the pulley seats with the proper interference. Align the pulleys with a straightedge or laser before tensioning: angular or parallel misalignment shortens belt life and stresses the equipment bearings. Tension is adjusted according to the machine manufacturer's manual; excessive tension overloads the supports and low tension makes the belt slip and wear the groove.

If you need a nearby size, a different diameter or fewer grooves, we can manufacture it. Send the part number POLEA 210 10C or the diameter and number of grooves you are looking for, and we'll quote the variant. We can also evaluate the replacement of an existing pulley if you tell us the outside diameter, shaft diameter, groove width and belt section used by the equipment.

MR Accesorios Industriales manufactures this pulley in section C and sells it together with belts, bushings and bearings to complete the drive. If you have doubts about the pulley that corresponds to your machine, send the part number by WhatsApp and we'll help you define it.