Industrial pulley 210 mm, 1 groove, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
EMMAR POLEA 210 1C is a reference of pulleys, within Power transmission. Request a quote for POLEA 210 1C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The 210 1C pulley is an in-house manufactured power transmission pulley, EMMAR Accesorios Industriales brand, designed to be mounted on shafts and transmit motion by means of section C V-belts. Its 210 mm diameter and single groove make it suitable for simple transmission ratios in continuous-use equipment. It is machined in our own factory, which allows the bore and keyway to be adjusted according to the available shaft.
This item is a pulley with a 210 mm diameter, 1 groove and section C. That combination defines the type of belt it accepts and the number of transmission lines it can handle. Section C corresponds to high-profile V-belts, suitable for medium and high power. As it is in-house manufactured, EMMAR brand, the central bore and keyway can be machined according to the size of the shaft where it is mounted.
It is used in belt-driven equipment: fans, compressors, centrifugal pumps, mills, conveyor belts and machine tools. It also appears in gearboxes and drive systems where a fixed transmission ratio between two shafts is required. In all cases it is advisable to verify that the driving and driven pulleys share the same belt section so that contact is correct.
To select it, take into account the pitch diameter, the belt section, the number of grooves and the shaft diameter. The bore and keyway are defined in the order, because a pulley with the same outer diameter can be mounted on different shafts. Also check the alignment between pulleys and the belt tension: misalignment accelerates wear of the groove and the belt.
To quote an equivalent, send us the full part number, the diameter, the section and the number of grooves. With that data we will propose the pulley of another size that fits the same shaft or machine it to measure. We can also review the required bore and keyway so that mounting is direct.
To request a quote for this pulley or ask about a variant, write to us by WhatsApp with the part number POLEA 210 1C. At MR Accesorios Industriales we manufacture pulleys and other transmission components, and we can guide you on the option that best suits your equipment. Tell us what shaft you have and what belt you use, and we will reply with the corresponding reference.
Dimensions
- Size
- 210mm
- Grooves
- 1
- Section
- C
Frequently Asked Questions
- What belt does the 210 1C pulley use?
- It uses a section C V-belt, which is the one corresponding to its groove profile. It is important that the driven pulley is also section C so that the belt rests properly in both grooves and does not deform.
- Can it be ordered with a different bore?
- Yes. As it is in-house manufactured, EMMAR brand, the central bore and keyway are machined according to the shaft where it is mounted. Indicate the shaft diameter and keyway measurements when making the inquiry.
- How do I request an equivalent or different-size pulley?
- Send by WhatsApp the part number, the diameter, the section and the number of grooves. With that data we will propose the pulley of another size that fits the same shaft or manufacture it to measure.