Industrial pulley 160 mm, 1 groove, section C

EMMAR POLEA 160 1C is a pulleys reference, within Power transmission. Request a quote for POLEA 160 1C via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 160 1C pulley is a power transmission pulley of in-house manufacturing, EMMAR Accesorios Industriales brand, designed to be mounted on shafts and transmit motion by means of section C V-belts. It has a 160 mm diameter and a single groove, which makes it suitable for simple drives where a direct drive ratio is sought. It is machined in our own factory and balanced for continuous operation.

This item is a pulley with a 160 mm diameter, with 1 groove and section C. The POLEA 160 1C designation summarizes those three variables: size, number of grooves and belt profile. The 160 mm diameter corresponds to the pulley pitch diameter, and the groove is shaped to receive a section C V-belt. It is an in-house manufactured part, EMMAR brand, not a resale: it is turned, grooved and balanced in our factory.

Typical applications of a 160 mm section C pulley with one groove are medium and low speed drives with moderate to high loads: industrial fans, centrifugal pumps, screw compressors, light conveyor belts and machine tools. It is also used as a replacement pulley in equipment where the original groove wore out or deformed due to misalignment. Being single-groove, it simplifies mounting and reduces the weight on the shaft.

To mount it, verify that the shaft diameter matches the pulley bore and that the key fits without play. The pulley is secured with a set screw or with a taper bushing depending on the case, and it is advisable to align it with the driving pulley using a straightedge or an alignment laser. Belt tension is adjusted until it yields between 10 and 15 mm with thumb pressure on the longest span. Check groove wear: if the belt rests on the bottom, the pulley is due for replacement.

If you need a nearby size, another diameter or more grooves, send us the POLEA 160 1C part number by WhatsApp and we will quote the variant that best suits. We can also manufacture to measure if the shaft or the groove are not standard. For equivalents, send us the pitch diameter, the number of grooves and the belt section you use, and we will quote the manufacturing.

MR Accesorios Industriales has been manufacturing pulleys, split plummer block housings and ANSI roller chains for more than 80 years. If your equipment needs a 160 mm section C pulley with one groove, write to us on WhatsApp with the part number and we will reply with the quote.