Industrial pulley 700 mm, 6 grooves, section B

EMMAR POLEA 700 6B is a pulleys reference, within Power transmission. Request a quote for POLEA 700 6B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

This industrial pulley with a 700 mm diameter and 6 grooves for section B belts is a power transmission part manufactured by EMMAR Accesorios Industriales. It is used to transmit motion between parallel shafts in equipment that requires several belts working simultaneously, such as mills, mixers, compressors or conveyors. Its construction seeks centering and balance to handle continuous duty regimes. If you need to replace an existing pulley or build a new drive, send us the part number and your shaft dimensions to request a quote.

The POLEA 700 6B is a section B belt drive pulley, with a 700 mm diameter and 6 grooves. Section B defines the groove profile and the type of belt that corresponds to it; the 6 grooves allow several belts to be mounted in parallel on the same pulley, distributing the load among all of them. It is an in-house manufactured part, EMMAR brand, designed for shafts that rotate at moderate speeds and transmit torque continuously. It is machined so that the grooves stay aligned and the assembly does not vibrate.

This type of pulley appears in equipment where power must be transmitted with several belts: mills, mixers, screw compressors, vibrating screens, conveyor belts and process machines in general. It is also used to replace worn pulleys or to modify the transmission ratio by changing the diameter of the drive or driven pulley. Having 6 grooves, it is commonly seen in drives that need more torque capacity than a pulley with few grooves, while keeping a 700 mm diameter.

To select it, take into account the shaft diameter, the type of keyway and the fastening system you will use. Check that the belt section matches the groove: a belt of a different section does not seat properly and wears quickly. Also check the alignment between pulleys and the belt tension, because a 700 mm pulley with 6 grooves that is misaligned generates vibration and uneven wear. If the equipment works with variable loads, it is advisable to check the minimum pulley diameter allowed by the belt you will use.

If you need an equivalent pulley or a nearby size, send us the part number POLEA 700 6B or that of the original pulley, along with the shaft diameter, the number of grooves and the belt section. With those data we can see whether there is a pulley in our line that fits or whether it is better to manufacture it. We can also guide you if you have doubts about the section or the number of grooves your equipment needs. The idea is that you don't buy a pulley that then doesn't work for you.

To request a quote for this pulley or ask about a similar size, write to us by WhatsApp and send us the part number POLEA 700 6B. If you have photos or shaft measurements, even better: that way we reply with the option that best suits your machine. MR Accesorios Industriales manufactures and sells power transmission products, and can advise you so that the pulley you choose works with the rest of the drive.