Industrial pulley 380 mm, 6 grooves, section B

EMMAR POLEA 380 6B is a pulleys reference, within Power transmission. Request a quote for POLEA 380 6B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 380 6B pulley is a V-belt drive pulley manufactured by EMMAR Accesorios Industriales. It has a 380 mm diameter and 6 grooves for section B belts. It is used to transmit power between parallel shafts in industrial equipment: fans, compressors, pumps, conveyor belts and production machines. Because it is in-house manufacturing, the bore, keyway and balancing can be machined according to the equipment's needs. If you need to replace an existing pulley or set up a new transmission, send us the part number by WhatsApp and we'll quote you.

This pulley has a 380 mm diameter, 6 grooves and section B. Section B is a classic narrow-pitch V-belt, suitable for medium power and moderate peripheral speeds. The 6 grooves allow the load to be distributed among several belts, which reduces the stress on each one and improves drive continuity if a belt fails. The 380 mm diameter defines the transmission ratio when combined with the driven shaft pulley. The part is manufactured at MR, so the bore and keyway machining is adjusted to the equipment shaft dimensions.

Typical applications of a 6-groove section B pulley are equipment that needs to transmit power continuously and with some reserve: industrial fans, screw compressors, centrifugal pumps, conveyor belts, mixers and machine tools. It is also used to replace worn or cracked pulleys in production lines. Because it has several grooves, it is commonly seen in drives where the goal is to reduce vibration and slippage, or where the equipment must keep running even if one belt breaks.

To mount this pulley, verify that the bore and keyway match the shaft. The pulley is fixed with a key and, depending on the case, with a set screw or taper bushing. It is important to align the pulleys with a straightedge or a laser so the belts run parallel and do not wear on one side. Belt tension is adjusted according to the equipment manual: too little tension makes them slip, and too much loads the shaft bearings. If the pulley will rotate at high speed, it should be balanced. At MR we can machine the bore, keyway and balancing according to the equipment data.

If you need a pulley equivalent to the 380 6B, send us the complete part number, the equipment brand and a photo of the part. With that data we can confirm whether the in-house manufactured pulley matches in diameter, grooves and section, or whether a nearby size is needed. We can also manufacture a custom pulley if the shaft or keyway are not standard. For that, send us the shaft diameter, the bore length and the number of grooves. The quote is made via WhatsApp with the part number MR-POLEA-B6-380 or with the designation POLEA 380 6B.

MR Accesorios Industriales manufactures this pulley and other power transmission parts. If you have questions about the 380 6B pulley, send the part number by WhatsApp and we will reply with the technical data you need for your equipment. You can also ask about pulleys in other sizes, groove counts or sections.