Industrial pulley 600 mm, 5 grooves, section B

EMMAR POLEA 600 5B is a pulleys reference, within Power transmission. Request a quote for POLEA 600 5B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 600 5B pulley is a V-belt drive pulley manufactured by EMMAR Accesorios Industriales. It has a 600 mm diameter and 5 grooves for section B belts. It is used to transmit power between parallel shafts in equipment that demands high drive capacity and good heat dissipation. Because it is in-house manufactured, the bore, keyway and balancing can be machined according to the equipment's needs. Send us the part number via WhatsApp and we'll quote you.

This pulley has a 600 mm outer diameter and 5 machined grooves for section B V-belts. Section B is one of the most widespread in industrial drives: it accepts classic-profile belts and is used in medium and high power ranges. The 5 grooves allow the load to be distributed among several belts, which reduces the stress on each one and improves drive continuity. It is a cast iron or machined steel part, depending on the application, and is balanced to work at the usual industrial speeds.

It is used in industrial fans, screw compressors, mills, mixers, high-flow centrifugal pumps and conveyors. It also appears in continuous process machines, where belt drives absorb vibrations and protect the motor against overloads. In food, water treatment and mining plants, the 600 mm pulley with 5 grooves is chosen when shafts need to be moved at moderate speed with high torque. It is a robust alternative to other systems when simple maintenance and accessible spare parts are sought.

To select it, take into account the pitch diameter, the number of grooves, the belt section and the type of bore (cylindrical, tapered or with detachable bushing). Check the center distance and the transmission ratio so that the belt works within its range. Alignment between pulleys and correct tension prevent irregular wear and noise. If the equipment vibrates, it is advisable to check the balancing and the condition of the shaft bearings. The pulley is mounted with a key and fixed with set screws or a retaining plate depending on the design.

If you need a different size, we can manufacture a pulley with another diameter, another number of grooves or for section A, C or SPB belts. We can also adapt the bore to your shaft, add a keyway or change the material. To request an equivalent or a nearby size, send us the original pulley's part number, the belt section, the number of grooves and the pitch or outer diameter. With that data we confirm the part that best fits your equipment.

MR Accesorios Industriales manufactures this pulley and other power transmission parts. If you want to request a quote or ask about a variant, write to us via WhatsApp with the part number POLEA 600 5B and your application data. We will reply with the appropriate alternative.