Double sprocket with hub, pitch 5/8", 95 teeth

MR Piñón doble 5/8" Z95 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 5/8" Z95 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 5/8" Z95 is a toothed wheel supplied by MR Accesorios Industriales, designed to transmit motion in 5/8" pitch chains. Its hub design allows it to be mounted on shafts and fastened with set screws or a key, as applicable. It is used in equipment where two chains need to be driven in parallel or the power output needs to be doubled. Being made of SAE 1045 steel, it offers a strong base for subsequent machining and for working with moderate loads.

This item is a double sprocket with hub, 5/8" pitch and 95 teeth, supplied in SAE 1045 steel. The designation Double sprocket 5/8" Z95 indicates that it is a piece with two toothed rings integral to a central hub, which allows two chains to be mounted on the same shaft. The 5/8" pitch corresponds to ANSI 50 chain, and the 95 teeth define the transmission ratio. The hub facilitates anchoring to the shaft by means of set screws or a keyway, depending on the machining required.

Typical applications of this double sprocket appear in drive lines where motion needs to be doubled: belt or roller conveyors, agricultural machinery, packaging equipment and lifting systems. It is also used in gearboxes and transmission cases requiring two synchronized outputs. Because of its number of teeth, it is common in high reduction ratios or in the final stage of a kinematic chain, where low speed and high torque are sought.

To correctly select this sprocket, take into account the chain pitch (5/8"), the number of teeth (95) and the diameter of the shaft where it is mounted. The hub must have a bore that matches the shaft, and the fastening system — set screw, key or both — must be suitable for the torque to be transmitted. Also check alignment between sprockets and chain tension, because a misaligned mounting accelerates wear on teeth and bushings.

If you need a sprocket with a different number of teeth, another pitch or a hub with different dimensions, we can source it or find the equivalent. To do so, send us the part number MR-PINON-DOBLE-5-8-Z95 or the full designation by WhatsApp, along with the shaft size and the chain pitch you use. With that data, we will quote the part that best suits your equipment, whether from the brands we supply.

At MR Accesorios Industriales we supply split plummer block housings, ANSI chains and pulleys, as well as bearings, seals, bushings and lubricants. This double sprocket is part of our power transmission line. If you have doubts about compatibility with your chain or the mounting, write to us on WhatsApp and we will advise you. Send the part number and we will quote you with no obligation.