Double sprocket with hub, pitch 5/8", 60 teeth

MR Piñón doble 5/8" Z60 is a reference of sprockets and gears, within Power transmission. Request a quote for Piñón doble 5/8" Z60 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The double sprocket 5/8" Z60 is a power transmission chain sprocket that MR Accesorios Industriales supplies in SAE 1045 steel. It is used to transmit motion between parallel shafts by means of a 5/8" pitch chain, and its double-row design with hub allows it to be mounted on a shaft and to couple two chains simultaneously. It is a part designed for mechanisms that need to synchronize two transmission lines or duplicate the drive capacity without adding a second sprocket.

This sprocket is identified by its 5/8" pitch and 60 teeth, with a double-row configuration and central hub. It is manufactured in SAE 1045 steel, a material with good machinability and strength that is commonly used in transmission components. The hub allows it to be fixed to the shaft with the appropriate fastening elements, and the double toothing makes it possible for two chains to mesh independently or together, depending on the mounting. MR commercializes it under its own line, with dimensional control on the main characteristics.

Typical applications of a double sprocket of this type appear in conveyor lines, packaging machines, lifting equipment and transmission systems where two chain runs need to be driven from the same point. It is also found in synchronization mechanisms, in roller drives and in equipment where the space available to mount two separate sprockets is limited. By concentrating two toothings in a single part, alignment is simplified and the number of components in the assembly is reduced.

To select this sprocket correctly, take into account the chain pitch, the number of teeth, the shaft diameter and the type of fastening you will use on the hub. Check that the chain is compatible with the 5/8" pitch and that the lubrication and alignment between sprocket and chain are adequate to avoid premature wear. If the mounting requires a different transmission ratio, a sprocket with a different number of teeth within the same series can be evaluated. The choice of material and surface treatment also influence service life depending on the load and working speed.

If you need an equivalent, the most practical thing is to send us the current part number, a photo of the part or a sketch with the main dimensions: pitch, number of teeth, hub diameter and shaft diameter. With that data we can guide you toward a sprocket from the same series or look for a compatible alternative. We work with standard 5/8" pitch sizes and can also look for an alternative part from the line based on a sample or drawing. The idea is that you can replace the component without stopping the production line.

To move forward with the quote, send us the part number MR-PINON-DOBLE-5-8-Z60 or the full designation by WhatsApp. Our technical team reviews the inquiry and replies with the corresponding options. If the sprocket is mounted in a critical assembly, we can advise you on mounting and lubrication so that the transmission works reliably. MR Accesorios Industriales commercializes and supplies power transmission components with technical support, and is available to help you define the right part.