Double sprocket with hub, pitch 5/8", 37 teeth

MR Piñón doble 5/8" Z37 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 5/8" Z37 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 5/8" Z37 is a power transmission sprocket that MR Accesorios Industriales supplies with a machined hub and 37 teeth. It is used with 5/8" pitch chains to drive two lines at once from a single shaft, which is common in conveyors, elevators and continuous process machines. Because it is supplied by MR, the hub machining can be adjusted to the shaft diameter and the type of keyway your equipment requires.

This item is a double sprocket with hub, 5/8" pitch and 37 teeth (z=37), machined in SAE 1045 steel. The double configuration allows two chains to be mounted on the same body, either to duplicate the drive or to synchronize two strands with a single sprocket. The hub gives the sprocket a longer support on the shaft, which helps distribute the load better and maintain alignment when the load is not perfectly symmetrical.

It is found in chain conveyors, bucket elevators, motorized roller tables and packaging lines where two chains need to be driven in parallel. It also appears in agricultural machinery and in process equipment that works with 5/8" pitch and needs a sprocket with a hub for secure shaft mounting. Because it is supplied by MR, the sprocket can be adapted to different shaft sizes and keyway types within the same tooth geometry.

To choose correctly, verify that the chain pitch is 5/8" and count the teeth of the sprocket you are replacing: if they do not match, the transmission ratio changes and so does the output speed. Also check the shaft diameter and hub length available on your machine, since the fit depends on them. During assembly, align both chains with straightedges or dial indicators, check the tension and lubricate according to the operating conditions so that wear is even.

If the sprocket you need is not exactly this one, an equivalent or a nearby size can be requested: for example, another number of teeth within the same 5/8" pitch or a hub variant with a different shaft diameter. For that, it is best to send the current part number, a photo of the mounted part and the shaft dimensions. With that data, the technical team at MR Accesorios Industriales evaluates which alternative supplied by MR fits best.

To request a quote for this double sprocket 5/8" Z37, send the part number MR-PINON-DOBLE-5-8-Z37 by WhatsApp along with the quantity and, if you have them, the shaft and keyway dimensions. That way the quote comes out with the correct configuration from the first message.