Double sprocket with hub, pitch 1/2", 36 teeth

MR Piñón doble 1/2" Z36 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 1/2" Z36 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 1/2" Z36 is a chain drive sprocket with two toothed rings and a central hub, supplied by MR in SAE 1045 steel. It is used to drive two chains in parallel from a single shaft, keeping the strands synchronized. Its 1/2" pitch and 36 teeth place it in the medium drive range, where a balance between speed and pulling capacity is sought. It is a part designed for continuous service in industrial equipment.

This item is a double sprocket with hub, 1/2" pitch and 36 teeth, machined in SAE 1045 steel. The designation Double sprocket 1/2" Z36 indicates that it is a wheel with two toothed rings integral to a central hub, to be mounted on a shaft and drive two chains with the same motion. The 1/2" pitch corresponds to roller chains of that standard pitch, and the 36 teeth define the pitch diameter and the transmission ratio. The hub allows fastening by key or screw, depending on the equipment design.

Typical applications of a double sprocket of this type appear in drives where two chain lines must rotate synchronized: double-chain conveyors, bucket elevators, roller tables, packaging machines and material handling equipment. It is also found on drive shafts that distribute power to two branches, or in configurations where pulling capacity must be doubled without increasing the chain pitch.

To correctly select this sprocket, verify that the chain pitch matches the 1/2" pitch and that the number of teeth is compatible with the desired transmission ratio. Check the shaft diameter and the hub fastening type, and confirm that the total width of the double sprocket fits the available space. SAE 1045 steel accepts heat treatments and offers good wear resistance in continuous service. During assembly, align the rings with the chains and check the tension to avoid side loads.

If you need a sprocket with a different number of teeth, another pitch or a different hub, we can evaluate supplying a nearby size or an equivalent. To do so, send us the part number MR-PINON-DOBLE-1-2-Z36 or the full designation, together with the chain and shaft data. We can also review variants in heat-treated SAE 1045 steel or in another material, depending on the demands of your equipment.

MR Accesorios Industriales supplies this double sprocket in SAE 1045 steel, with more than 80 years of experience in power transmission. If you want to request a quote or ask about a similar size, write to us on WhatsApp with the item part number. We will reply with the technical information and the corresponding quote.