Double sprocket with hub, pitch 1/2", 35 teeth

MR Piñón doble 1/2" Z35 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 1/2" Z35 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 1/2" Z35 is a chain wheel supplied by MR Accesorios Industriales, designed to transmit motion in 1/2" pitch chains. It has 35 teeth and a central hub, and is machined from SAE 1045 steel. It is used in power transmissions where precise toothing and a firm shaft attachment are required. If you need to replace a worn sprocket or build a new transmission, this model is quoted by WhatsApp with the exact part number.

This item is a double sprocket with hub with 1/2" pitch and 35 teeth, supplied by MR in SAE 1045 steel. The commercial designation is Double sprocket 1/2" Z35 and it corresponds to part number MR-PINON-DOBLE-1-2-Z35. The term double means that the toothing and the hub are formed in a single piece, which simplifies mounting and improves concentricity. The 1/2" pitch indicates the chain it meshes with; the 35 teeth define the transmission ratio. The hub allows it to be fastened to the shaft with the usual fastening elements.

It is used in chain transmissions in industrial machines and equipment: conveyors, elevators, mixers, belts and drive systems in general. It also appears in agricultural implements and in material handling equipment where a moderate speed reduction or increase is required. Being made of SAE 1045 steel, it withstands the tensile stresses and wear typical of continuous meshing. It is a frequently replaced part when the toothing becomes rounded or the hub deforms due to overloads.

To select it, check that the chain pitch is 1/2" and that the number of teeth matches the desired ratio. Check the shaft diameter and the hub fastening system: keyway, set screw or taper bushing as applicable. Check the alignment between sprockets and the chain tension to avoid premature wear. If the original sprocket has no visible brand, take the measurements of the toothing and the housing before requesting the replacement.

If you need an equivalent or a nearby size, send us the part number MR-PINON-DOBLE-1-2-Z35 or a photo of the sprocket with the main measurements: pitch, number of teeth, hub diameter and type of fastening. With that data we can guide you toward another toothing in the same series or evaluate a custom manufacturing. We can also quote variants in SAE 1045 steel with different treatments if the application requires it.

To request a quote for this double sprocket 1/2" Z35, write to us by WhatsApp at MR Accesorios Industriales with the part number or the designation. We will confirm alternatives in the series. If you have doubts about mounting or selection, the technical team helps you define the right option for your transmission.