Double sprocket with hub, pitch 1/2", 15 teeth

MR Piñón doble 1/2" Z15 is a sprockets and gears reference, within Power transmission. Request a quote for Piñón doble 1/2" Z15 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The double sprocket 1/2" Z15 is a power transmission component supplied by MR Accesorios Industriales. It is used to transmit motion between parallel shafts by means of a 1/2" pitch chain, with two toothed rings integral to a central hub that allows mounting on the shaft. Its SAE 1045 steel construction gives it resistance to wear and to the loads typical of industry. It is a part that MR supplies, intended for replacement and for projects that require a reliable toothed wheel with known dimensions.

This item is a double sprocket with hub, 1/2" pitch and 15 teeth, machined in SAE 1045 steel. The designation Double sprocket 1/2" Z15 indicates that it is a toothed wheel with two rings of 15 teeth each, joined by a hub that allows it to be fixed to the shaft. The 1/2" pitch corresponds to the chain that meshes with this sprocket. SAE 1045 material is a carbon steel with good machinability and hardenability, suitable for parts subjected to moderate stresses and contact wear.

Typical applications of a double sprocket of this type include chain drives in agricultural machinery, conveyors, lifting equipment and motion systems in industrial plants. Because it has two rings, it can be used to transmit motion to two chains simultaneously or to double the pulling capacity on the same shaft. It is also used in mechanisms where synchronization between two chain runs must be maintained, as in some roller or belt drives.

To correctly select this sprocket, take into account the chain pitch (1/2"), the number of teeth (15) and the diameter of the shaft on which it is mounted, which must match the hub bore. Also check the type of fastening: keyway, set screw or similar securing system. During mounting, make sure the rings are aligned with the driven sprockets to avoid irregular wear and noise. Proper lubrication of the chain and sprocket extends the service life of the assembly.

If you need a sprocket with a different number of teeth, a different pitch or a nearby size, you can consult us. We supply the line and can guide you toward the option closest to your requirement. To request an equivalent, the most practical approach is to send us the current part number, a photo of the part or the main dimensions: pitch, number of teeth and bore diameter. With that data we will confirm alternatives.

To request a quote for this double sprocket 1/2" Z15, send us the part number MR-PINON-DOBLE-1-2-Z15 by WhatsApp. You can also inquire about other sizes in the sprocket and toothed wheel line. At MR Accesorios Industriales we advise you so that you find the part that best suits your equipment.