Double sprocket with hub, pitch 1/2", 14 teeth

MR Piñón doble 1/2" Z14 is a reference of sprockets and gears, within Power transmission. Request a quote for Piñón doble 1/2" Z14 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The double sprocket 1/2" Z14 is a chain wheel sold by MR Accesorios Industriales, designed to transmit motion in 1/2" pitch chains. Its double-row design with hub allows it to be mounted on shafts and to couple two chains in parallel, which is common in machines that need to synchronize movements or double the drive. It is machined in SAE 1045 steel, a material suitable for continuous service with moderate loads.

This item is a double sprocket with hub, 1/2" pitch and 14 teeth (z=14), machined in SAE 1045 steel. The designation Double sprocket 1/2" Z14 indicates the chain pitch, the number of teeth and the double-row configuration with a central hub. The 1/2" pitch corresponds to ANSI 40 series roller chains, and the 14 teeth define the transmission ratio and the tangential speed. The hub allows it to be fixed to the shaft with a key or set screw, depending on the equipment design.

It is used in chain drives of machine tools, conveyors, mixers, elevators and power transmission equipment in general. It also appears in agricultural implements and in production lines where the drive must be duplicated on the same shaft. Being double, it accepts two chains in parallel, which simplifies assembly when two branches must be synchronized or the pulling capacity increased without changing the pitch.

To select it, verify that the chain pitch matches the 1/2" pitch and that the number of teeth is compatible with the desired transmission ratio. Check the shaft diameter and the type of hub fixing, and make sure the alignment between sprockets is correct to avoid premature wear. Lubrication and chain tensioning also affect the service life of the assembly. If space is limited, take into account the outside diameter that results from the 14 teeth.

If you need a different number of teeth or a hub variant, send us the code MR-PINON-DOBLE-1-2-Z14 on WhatsApp along with the shaft and chain dimensions. With that data we can offer you an equivalent within the line we sell or evaluate a custom machining. We can also advise you if the pitch or the number of teeth do not exactly match what appears on the drawing.

MR Accesorios Industriales sells this sprocket and supplies power transmission. To request a quote, write to us on WhatsApp with the product code and the details of your application. That way we send you the quote without delay.