LINK-BELT ZB2055MM flange bearing 4 holes

LINK-BELT ZB2055MM is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZB2055MM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

LINK-BELT 2000 series flange brackets are mounted units with a built-in bearing and a 4-bolt flange. They are used to support rotating shafts in equipment where mounting is done on a flat face: conveyors, mixers, pumps, fans and process machinery. The flange allows the unit to be fastened with four bolts and the shaft to be centered without machining the housing. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in power transmission.

The 2000 series designation reads in blocks. In ZB2040MM, for example, the initial letters identify the bracket type and the sealing system, the following digits indicate the shaft size and the final suffix defines construction or material variants. The series includes sizes that cover different shaft diameters within the same 4-bolt flange concept. To choose, send us the complete code shown on the plate or on the bracket body.

These brackets are seen in food and beverage plants, water treatment, cement, mining and material handling. In Argentina they are found in belt and chain conveyors, bucket elevators, horizontal mixers, blowers and process equipment where the shaft must be supported on a flat surface. The 4-bolt flange simplifies mounting and replacement: the complete unit is removed without disassembling the shaft or the equipment.

To select the bracket, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. Sealing defines protection against dust, water and process agents: choose the labyrinth or the oil seal depending on the environment. Lubrication must be the one indicated for the built-in bearing and periodic relubrication extends service life. Aligning the flange with the shaft prevents parasitic stresses; check the flat support and the tightening of the bolts.

Flange brackets from different brands with standardized dimensions coexist in the market. Interchangeability depends on the shaft diameter, the distance between holes and the mounting type. Often a bracket from another brand with the same shaft size and the same flange can replace the original, but it is advisable to verify the center height and the sealing system. If you cannot find the exact code, write to us on WhatsApp with the shaft size and a photo of the mounting.

MR Accesorios Industriales sells the LINK-BELT line in Buenos Aires, Argentina. If you need a 2000 series flange bracket, send us the code via WhatsApp (ZB2040MM, ZB2045MM, ZB2050MM or the one you have) and we will quote it shortly. We will also indicate the compatible alternative if you are looking for a specific variant.