Flange bearing 4 holes LINK-BELT ZB2045MM

LINK-BELT ZB2045MM is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZB2045MM via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

LINK-BELT 2000 Series flange bearings are mounted units with an integrated bearing and a 4-bolt flange. They are used to support rotating shafts in equipment where the mounting sits on a flat surface: conveyors, mixers, pumps, fans and process machinery. The flange allows the unit to be secured with four bolts and centers the shaft without machining the housing. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with over 80 years of experience in power transmission.

The 2000 Series designation is read in blocks. In ZB2040MM, for example, the initial letters identify the housing type and sealing system, the following digits indicate the shaft size, and the final suffix defines construction or material variants. The series includes sizes such as ZB2040MM, ZB2045MM, ZB2050MM and ZB2055MM, covering different shaft diameters within the same 4-bolt flange concept. To choose, send us the full code shown on the nameplate or on the housing body.

These bearings are found in food and beverage plants, water treatment, cement, mining and material handling. In Argentina they are found in belt and chain conveyors, bucket elevators, horizontal mixers, blowers and process equipment where the shaft must be supported on a flat surface. The 4-bolt flange simplifies mounting and replacement: the complete unit is removed without disassembling the shaft or the equipment.

To select the bearing, consider the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The sealing defines protection against dust, water and process agents: choose the labyrinth or the oil seal depending on the environment. Lubrication must be the one specified for the integrated bearing, and periodic relubrication extends service life. Aligning the flange with the shaft prevents parasitic stresses; check the flat support and the tightening of the bolts.

Flange bearings from different brands with standardized dimensions coexist in the market. Interchangeability depends on the shaft diameter, the distance between holes and the type of mounting. Often a bearing from another brand with the same shaft size and the same flange can replace the original, but it is advisable to verify the center height and the sealing system. If you cannot find the exact code, write to us on WhatsApp with the shaft size and a photo of the mounting.

MR Accesorios Industriales supplies the LINK-BELT line in Buenos Aires, Argentina. If you need a 2000 Series flange bearing, send us the code on WhatsApp (ZB2040MM, ZB2045MM, ZB2050MM or whichever you have) and we will quote it shortly. We will also indicate the compatible alternative if you are looking for a specific variant.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.