LINK-BELT Y2E32NL insert bearing

LINK-BELT Y2E32NL is a reference of insert bearing, within Bearings. Request a quote for Y2E32NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT series 200 insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block or pillow block housings to form a bearing unit. It is used in equipment where the shaft turns on supports that must be mounted and dismounted frequently. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and quotes via WhatsApp the exact part number you need.

The designation of the 200 series reads in blocks: the initial letters identify the insert family, the number 2 indicates the dimensional series, and the suffixes that follow — such as NL in the examples Y2E20NL and Y2E32NL — indicate variants of sealing, locking or outer ring design. That combination of letters and numbers defines the shaft diameter, the locking type and the sealing. To choose correctly, send us the complete part number that appears on the nameplate or on the old bearing.

These inserts are seen in belt conveyors, bucket elevators, mixers, mills, packaging belts and process equipment in food, chemical, cement and aggregate plants. In Argentina they are common in production lines that work with dust, moisture or frequent washdown, where the split plummer block housing allows the bearing to be changed without disassembling the whole shaft. They are also used in fans, pumps and agricultural machinery.

To select the insert, first look at the shaft diameter and the locking type: there are versions with set screws, with an eccentric ring or with a taper sleeve. Sealing is key: in environments with dust or water, a reinforced contact seal is best, while in clean, high-speed applications a lighter one can be used. Check the alignment of the housing and lubricate with the grease specified for the working temperature. Mounting without blows and with the nut or set screw properly tightened prevents premature failures.

Series 200 inserts from different brands share basic dimensions, but they are not always interchangeable: the sealing, the locking system and the outer ring tolerance change. A compatible alternative can be evaluated by comparing shaft diameter, inner ring width and locking type. MR Accesorios Industriales tells you the option that best suits your equipment.

If you need a LINK-BELT series 200 insert, send us via WhatsApp the complete part number — for example Y2E20NL or Y2E32NL — or the shaft and housing measurements. We will quote it shortly and, if needed, tell you the compatible alternative.