Insert bearing LINK-BELT Y2B08NL*■

LINK-BELT Y2B08NL*■ is a insert bearing reference, within Bearings. Request a quote for Y2B08NL*■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or pillow block units. It is used when a simple bearing unit, quick to mount and easy to replace in power transmission and conveying equipment, is required. Its design allows the shaft to be locked with set screws or a collar, depending on the variant, and it supports lubrication and sealing for continuous operation in environments with moderate dust or humidity.

The series designation is read in blocks: the letter Y identifies the LINK-BELT insert family, the number that follows indicates the diameter series —in this case the 200 series— and the suffixes B, NL and the final symbol describe construction, sealing or locking variants. For example, Y2B08NL*■ corresponds to a 200 series insert with those characteristics. When requesting a quote, send the complete code exactly as it appears on the nameplate or drawing, so we can give you the exact reference.

These inserts are seen in belt conveyors, bucket elevators, mixers, screens, mills and packaging lines. In food, cement, aggregate and chemical plants, where maintenance is done with the equipment stopped for the shortest possible time, the 200 series insert allows the unit to be replaced without disassembling the entire housing. They are also used in fans, pumps and process equipment that run at moderate speeds with radial loads and some axial load.

To choose correctly, look at the shaft diameter, the housing type and the locking system: there are versions with set screws on the extended inner ring or with an eccentric collar. Check the sealing —simple, lip or with additional protection— according to the contamination of the environment. During mounting, clean the shaft seat, verify that the housing is aligned and tighten the set screws onto the shaft, not onto the raceway. Lubricate with the recommended grease and check the clearance after the first hours of running.

As for interchangeability, 200 series inserts with an extended ring and the same shaft and housing dimensions are usually interchangeable across brands, but the sealing, locking and tolerance suffixes differ. Do not rely only on the series number: compare the shaft diameter, the inner ring width, the hole position and the locking type. If you have doubts, send us the original code and the shaft size, and we will tell you the compatible alternative.

MR Accesorios Industriales sells the LINK-BELT brand as an official brand. If you need this insert or a 200 series variant, write to us on WhatsApp with the code Y2B08NL*■ or with the shaft and housing dimensions. We will quote you shortly and, if needed, we will tell you the alternative that best suits your equipment. We can also advise you on the housing, lubrication and mounting so that the unit runs aligned and lasts as long as it should.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.