Insert bearing LINK-BELT UBG2E32NL*Δ■

LINK-BELT UBG2E32NL*Δ■ is a insert bearing reference, within Bearings. Request a quote for UBG2E32NL*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT 200 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split or pillow block housings to form a bearing unit. It is used in equipment that requires smooth rotation and simple alignment, such as conveyor belts, fans and plant machinery. MR Accesorios Industriales carries this line as an official brand and advises you on choosing the correct variant for your application.

The 200 series designation is read in blocks: the initial letters UBG identify the insert family, the number 2 indicates the diameter series, and the number that follows —20 or 32 in the examples UBG2E20NL and UBG2E32NL— indicates the bore diameter. The suffix E corresponds to the standard design, NL indicates the type of shaft locking, and the final symbols distinguish sealing or groove variants. With this data, the part you need is identified unambiguously.

In Argentine industry, this insert appears in belt conveyors, bucket elevators, mixers, blowers and packaging lines. It is also found in aggregate processing equipment, balanced feed plants and ventilation systems. Its format allows the insert to be replaced without disassembling the entire housing, which simplifies maintenance in plants that work with scheduled shutdowns.

To select correctly, verify the shaft diameter and the type of locking —set screw, eccentric or adapter— that your housing requires. Check the sealing: in dusty or humid environments, a variant with an additional seal is advisable. During mounting, clean the shaft, apply the specified lubrication and check the housing alignment to avoid axial loads. Even tightening of the set screws extends the insert's life.

200 series inserts are interchanged between brands by diameter number and locking type, but not all combinations of sealing and outer ring are equivalent. Before replacing, compare the inner ring width, the groove position and the locking system. If you have doubts, send us the complete part number and the brand of the current housing: we will indicate the compatible alternative.

MR Accesorios Industriales carries the LINK-BELT line as an official brand and manufactures split plummer block housings, ANSI chains and pulleys. If you need insert UBG2E20NL, UBG2E32NL or any other variant of the 200 series, write to us on WhatsApp with the part number or the shaft dimensions and we will quote you shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.