Flange bearing 3 holes LINK-BELT P3S2M20E

LINK-BELT P3S2M20E is a flange bearing 3 holes reference, within Bearing housings. Request a quote for P3S2M20E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 3-bolt flange bracket with LINK-BELT insert bearing is an assembled unit that combines a cast iron housing with a self-aligning insert bearing. It is used to support rotating shafts in equipment where front mounting with three anchor points is required, such as conveyors, mixers, fans and process machinery. MR Accesorios Industriales supplies this line as an official brand and helps you choose the part number according to shaft diameter and locking type.

The designation of these brackets is read in blocks: the initial letter indicates the housing family, the first number the number of mounting bolts, the following letter the housing type, the M the shaft diameter in millimeters and the E the insert type. For example, P3S2M20E corresponds to a 3-bolt flange bracket for a 20 mm shaft, and P3S2M40E for a 40 mm shaft. The complete part number unambiguously identifies the part you need.

These brackets are found in food and beverage plants, in material handling, in the chemical industry and in the assembly of process equipment. In Argentina they are found in belt and chain conveyors, mixers, dryers, blowers and packaging lines. The 3-bolt flange allows mounting on sheet metal or structure with a fixed orientation, which is useful when the shaft works in a horizontal position and access is limited.

To select correctly, take into account the shaft diameter, the type of load and the environmental conditions. The insert usually comes with contact or labyrinth sealing depending on the application: in dusty or wet environments a tighter seal is advisable. Insert lubrication is permanent in most cases, but at high temperatures or high speeds the grease type should be reviewed. Aligning the flange with the shaft is key to avoiding stress on the bearing.

As for equivalents, flange brackets with insert bearings are available from several brands under their own nomenclature. Interchangeability depends on the flange dimensions, shaft diameter and insert locking type. It is not enough for the part number to be similar: the drawings must be compared. If you need to replace an existing unit, send us the original part number and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the LINK-BELT line and will quote the bracket you need. Send us the complete part number on WhatsApp, for example P3S2M25E, and we will reply promptly with the quote. If you cannot find the exact variant, write to us with the model or shaft dimensions and we will help you solve it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.