Flange bearing 4 holes LINK-BELT FCEU3K39

LINK-BELT FCEU3K39 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for FCEU3K39 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt 300 series 4-bolt flange unit is a mounted bearing that is fastened with four bolts onto a flat face, so that the shaft sits perpendicular to the mounting plane. It is used when the machine has a wall or plate to support it and a compact, self-aligning, easy-to-replace unit is needed. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The series designation is read in blocks: the letters FCEU identify the 4-bolt flange family, the first number after the letters indicates the housing series —in this case the 300 series— and the final number, the shaft diameter for which the insert is machined. Thus, FCEU3K27, FCEU3K31, FCEU3K35, FCEU3K39, FCEU3K47 and FCEU3K55 are the same flange unit with different shaft bores. The intermediate K indicates the type of locking of the inner ring onto the shaft.

These units appear in belt and chain conveyors, bucket elevators, mixers, screens, plant fans, centrifugal pumps and process equipment in food, chemical, cement and aggregate processing. In the Argentine market they are found in milling lines, balanced feed plants, sand washing plants and material handling systems where wall mounting simplifies the structure and leaves the side of the equipment free.

To choose correctly, you must define the shaft diameter, the locking type and the sealing according to the environment: dust, wash water or pressure washing call for more demanding seals. When mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check that the shaft turns without effort. The self-alignment of the insert absorbs small deviations, but it does not replace good initial alignment or correct lubrication.

Flange mounted units are interchanged between manufacturers by shaft number, number of holes, center distance and insert type, not by the complete code. Often the flange of one brand matches that of another and only the locking system or the seal changes. If you need to replace an existing unit, send us the code on the housing or the flange dimensions.

We have more than 80 years of experience in bearings and industrial accessories, and we carry the Link-Belt line as an official brand that MR supplies. Write to us on WhatsApp with the code FCEU3K27, FCEU3K31, FCEU3K35, FCEU3K39, FCEU3K47 or FCEU3K55, or with your flange dimensions, and we will send you a quote shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.