LINK-BELT FCEU3K35 flange bearing 4 holes

LINK-BELT FCEU3K35 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for FCEU3K35 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Link-Belt 300 series 4-bolt flange housing is a mounted bearing that is fastened with four bolts onto a flat face, so that the shaft is perpendicular to the mounting plane. It is used when the machine has a wall or plate to support it and a compact, self-aligning unit that is easy to replace is needed. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The series designation is read in blocks: the letters FCEU identify the 4-bolt flange family, the first number after the letters indicates the housing series —depending on the code— and the final number, the shaft diameter for which the insert is machined. Thus, FCEU3K27, FCEU3K31, FCEU3K35, FCEU3K39, FCEU3K47 and FCEU3K55 are the same flange unit with different shaft bores. The intermediate K indicates the type of locking of the inner ring onto the shaft.

These housings appear in belt and chain conveyors, bucket elevators, mixers, screens, plant fans, centrifugal pumps and process equipment in food, chemical, cement and aggregate processing. In the Argentine market they are found in milling lines, balanced feed plants, sand washing plants and material handling systems where wall mounting simplifies the structure and leaves the side of the equipment free.

To choose correctly you must define the shaft diameter, the locking type and the sealing according to the environment: dust, wash water or pressure washing call for more demanding seals. When mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check that the shaft turns without effort. The self-alignment of the insert absorbs small deviations, but it does not replace good initial alignment or correct lubrication.

Flange mounted units are interchanged between manufacturers by shaft number, number of holes, center distance and insert type, not by the full code. Often the flange of one brand matches that of another and only the locking system or the seal changes. If you need to replace an existing unit, send us the code on the housing or the flange dimensions.

We work the Link-Belt line that MR sells. Write to us on WhatsApp with the code on your flange, or with your flange dimensions, and we will quote you shortly.